Standards - Scientific & Medical Electronics - Page 1

Scientific & Medical Electronics Categories

EN 55011

IEC 60601-1-2

IEC 60601-2-27

EN/IEC 61326-1

Scientific & Medical Electronics

Surge4-5 Combo Wave Generator for IEC 61000-4-5 Testing

SKU: 11857

Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2, VDE 0847 4-5

Applications: EMC Surge, CE Marking

Built in CDN Power Handling: 270 Volts and 16 Amps

Combination/Wave Surge Output Capability: 200 Volts to 4.4 kV

External Coupling: Data Lines (Surge), 3PH EUT

Ships Same Day

VIEW PRODUCT Cart
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair

SKU: sku-881

Weight: 25 lbs. / 11.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 25 Amps (AC), 17 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 150 kHz to 30 MHz

VIEW PRODUCT Cart
3 Phase EFT/Burst, Surge Combination Wave Test System

SKU: 1785

Application/Test Type: CE Marking, EMC Precompliance Testing

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4

Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

Pulse amplitude: 0.2 – 5.0 kV

Pulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)

Rentals Ship Today

VIEW PRODUCT Cart
CE Mark Product Package for IEC/EN 61000-4 Series Compliance

SKU: 12854

Applications: CE Marking, EMC Precompliance Testing, Conducted Immunity

Harmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

Industries: Medical Devices

Test Setup: Conducted Immunity/Susceptibility Test Setup

Peak inrush current capability: greater than 500 Amps

Cost New:

Was:

Price Now:

$2,975.00 - $9,500.00

IN STOCK

ORDERING OPTIONS
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

SKU: sku-86

Weight: 700 grams (1.5 LB.'s)

Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.

Common Mode Impedance: 150 Ω +10/-20 Ω

Current Rating: 10 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

VIEW PRODUCT
Com-Power LI-125A 150 kHz - 30 MHz LISN, 50 uH, 25 Amps (Discontinued)

SKU: sku-12

Weight: 25 lbs. / 11.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 25 Amps (AC), 17 Amps (DC)

Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cm

Frequency Range: 150 kHz to 30 MHz

VIEW PRODUCT Cart
Magnetic Field Immunity Test System per IEC 61000-4-39

SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock

VIEW PRODUCT Cart
ESD Test Table

SKU: 11246

Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

Standards Met: IEC 60601-1-2, IEC 61000-4-2

Applications: Electrostatic Discharge Immunity Testing, EMC Precompliance Testing

Table Dimensions: .8 meters (H)

Table Top Ground Plane: 1.6m x .8m

Cost New:

Was:

Price Now:

$1,750.00 - $4,950.00

Typically Ships in 48-72 Hours

ORDERING OPTIONS
EM Test DPA 503N Flicker & Harmonics Analyzer

SKU: 11286

Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Max Current (per Channel): 32 Amps

Applications: Medical Device EMC Testing

Matching Impedance Network: EM Test AIF 503N

Inquire for Availability

VIEW PRODUCT Cart
Ranger Power Master PM3000HF 3-Phase Power Quality Analyzer with Flicker and Harmonics

SKU: 8845

Input Voltage: 0 - 480 VAC

Channels: 16

Applications: Harmonics and Flicker

Test Standards: IEC 61000-4-15, IEC 61326, IEC 61010

Additional Test Standards: IEC 61000-3-2, IEC 61000-3-3

Cost New:

Was:

Price Now:

$750.00 - $7,500.00

In stock

ORDERING OPTIONS
AH Systems SAS-521-4 Bilog Antenna, 25 MHz - 4 GHz

SKU: 11920

Antenna Factor (1 Meter): 7 to 30 dB/m

Antennas: Bilogical Antennas

Application/Test Type: RF EMC immunity testing, Radiated Emissions Testing, Improved high frequency gain

Connector: N type female

Dimensions: 22.2 in. (56.4 cm) x 38.5 in (97.8 cm) x 39 in (99.1 cm)

Inquire for Availability

VIEW PRODUCT Cart
Materials for EFT/Burst Laboratory Test Setup

SKU: 11245

Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)

Standards Met: IEC 60601-1-2, IEC 61000-4-2

Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity Testing

Table Dimensions: .8 meters (H)

Table Top Ground Plane: 1.6m x .8m

IN STOCK

VIEW PRODUCT Cart