The EMC Shop stocks bulk current injection test kits from Teseq, FCC and other manufacturers. he probe material meets the requirements of IEC 61000-4-6, ISO 11452-4, MIL-STD 461 CS114, RTCA/DO-160 section 20, and other standards.
Overview
- BCI KIT INCLUDES
- SPECIFICATIONS
- RELATED EQUIPMENT
Features & Specifications of Teseq CIP 9136A:
- Frequency range: 10 kHz - 400 MHz
- Window diameter: 43 mm
- Outside diameter: 113 mm
- Width: 61 mm
- Weight: approx. 2 kg
- Input connector: Type N
- Max.input power: 1000 W
- Max. time for continuous operation: related to the core temperature Rating at 10 kHz / 1000 W: approx. 10 min* Rating at 100 kHz / 500 W: approx. 7 min* Rating at 150 kHz / 500 W: approx. 5 min* Rating at 1 MHz to 400 MHz / 400 W: approx. 3 min*
- Max core temperature: 90?C
- Turns ratio: 1:1 Primary inductance @ 1 MHz: 4.7 µH typical
- Self resonant frequency: 12 MHz typical
- Impedance at resonance: 100 Ω typical *)
- Time based on a core temperature rise from 23°C to max. 90°C
Features & Specifications of Teseq MD 4070:
Frequency range: 4 kHz to 400 MHz
Transmission S21: typical +10 dB ±3 dB
(50 Ω system, 100 kHz to 100 MHz)
Transfer impedance: see graph for typical values
Max. signal current (linear): 30 mA
1 dB compression point (output): >27 dBm
Supply voltage: 12 V
Supply current: approx. 0.6 A
DC-connector: ODU-female 2 pins, plus on all inner conductors
Features & Specifications of Teseq PCJ 9201B:
| Description: | Jig calibration model for the probe current CIP-9136-A |
| General Features: | Full compliance with MIL-STD-461, IEC / EN 61000-4-6 Frequency range DC-400 MHz Dimensions 260 mm x 181 mm x 150 mm Maximum diameter of 115 mm probe Max opening 16 mm probe Maximum width of 67 mm probe Weight 4.5 kg |
