| White Noise Generator |
| Frequency Range | 150 kHz to 230 MHz |
| RF Level |
| Level range | min -60 dBm/Hz to -40 dBm/Hz |
| Broadband signal flatness | < ±3 dB (150 kHz to 80 MHz) |
| Out of band attenuation | > 20 dB (100 MHz) |
| Pulse Modulation |
| Rise/fall time (10%/90%) | < 1 µs |
| Modulation frequency range | 1 Hz to 10 Hz |
| Frequency resolution | 1 Hz |
| Duty cycle | 10% to 90% |
| Power Meter |
| Frequency range | 9 kHz to 1 GHz |
| Linear Measurement Range |
| Channel 1 | -35 dBm to +27 dBm |
| Channel 2, 3 | -45 dBm to +20 dBm |
| Max. input/no damage |
| Channel 1-3 | +28 dBm |
| Noise Level | >5 dB below the measurement range |
| Input Return Loss | >20 dB (below 500 MHz), >17 dB (500 MHz to 1 GHz) |
| Connector | BNC socket, 50 Ohm |
| Accuracy 10 to 30°C | |
| Power Amplifier |
| Frequency Range | 150 kHz to 230 MHz |
| Input Impedance | 50 Ohm |
| Output Impedance | 50 Ohm |
| Input Return Loss | min. 10 dB |
| Output Return Loss | Nominal min. 9.5 dB, 0 dB without damage |
| Gain | min.: 50 dB |
| Gain Flatness | max. +/- 3 dB |
| Saturated OutputPower | min. 49 dBm |
| Linear Output Power | min. 48 dBm |
| Max. input power without damage | max. +10 dBm |
| Harmonic distortion at linear output power | typ. < -20 dBc |
| Analog Ports |
| Front Panel |
| Generator Output | N socket 50 Ohm, 4 kHz to 1 GHz |
| Power Amplifier Input | N socket 50 Ohm, max. +10 dBm |
| Power Amplifier Output | N socket 50 Ohm |
| Power Meter Channel 1 to 3 | as defined in chapter “Power meter“ |
| Back Panel |
| Monitoring Input Analog | BNC socket, 0 to 24 V Ri=15 k?, 6 mV resolution |
| External modulation input | BNC socket, impedance >10 k?, level: 1 Vpp to get 100% AM, 1 Hz to 50 kHz |
| Digital Ports |
| Front Panel |
| USB | USB host connector for USB stick, keyboard, mouse |
| Back Panel |
| User port | D-Sub 15 pole with
4 TTL inputs,
4 TTL outputs,
+12 V / 800 mA, -12 V/200 mA and +5 V/800 mA power supply |
| Monitoring digital input | BNC socket
0 to 24 V via optical coupler Ri=1.5 kOhm
switching threshold approx. 2 to 3 V |
| Monitoring optical input | LWL (Light wave connector), HP versatile link HFBR0501 series 40 kBd, (avoid scattered light on the back panel) |
| Trigger input | BNC socket, TTL for external triggering, max. frequency 100 Hz, trigger delay <10 ms |
| RS232 | D-Sub 9 pole, up to 115200 Bd |
| RS232 optical | Connector 2 x HFBRx523 socket for 1 mm fiber optic cable with length between 5 m and 30 m with 115200 Bd, for other distances 38400 Bd, max. 50 m |
| 2x USB | USB host connector for USB stick, keyboard, mouse |
| USB device connector | For remote control |
| Network | RJ45, Ethernet 10/100 BASE-T |
| General Specifications |
| Mains Input | 100 to 240 VAC, 50/60 Hz, autoranging |
| Power Consumption | approx. 415 W |
| Operating Temperature range | 0°C to 40°C |
| Storage Temperature range | -20°C to 60°C |
| Relative Humidity | 95% / 30°C (no moisture condensation) |
| EMC | DIN/EN 61326-1:2006 |
| Shock | DIN/EN 60068-2-27 |
| Vibration | DIN/EN 60068-2-6 |
| Protection Class | DIN/EN 61010-1/IEC 61010-1 |
| Size (W x H x D) | 45 cm (19“) x 15 cm (3HU) x 42.3 cm (with handle bar and foot) |
| Weight | approx. 15 kg (with internal power amplifier),
approx. 8 kg (without internal power amplifier) |
| Size of Cardboard Box | 80 cm x 61 cm x 34 cm
(also for options ATN 60xx and/or LE 4070 additional space available) |
| Weight of Cardboard Box | Approx. 8 kg (empty) |
