Standards Categories
Standards Test Equipment
-
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
Logimetrics A600/C 4 to 8 GHz, 200 Watt TWT RF Amplifier
SKU: 11055
Frequency range: 4.0 GHz - 8.0 GHzGain: 40 dBImpedance: 50 ohms, VSWR 2.5:1 maximumInput Connector: Type "N" to 8 GHz, Type "SMA" above 8 GHzInput/Output Impedance: 50 ohms, VSWR 2.5:1 maximum$24,950.00In Stock -
Noiseken INS-4020 Impulse Noise Simulator
SKU: 11048
Test Standards: IEC 61000-4-4, MIL-STD-461 CS115Applications: EFT/Burst, EMC Precompliance, BCI TestingPulse Widths: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000nsOutput Voltage: 0.01~2.00kV ±10% with 50Ω LoadEUT Power Handling: AC240V Single phase, DC60V, 16ATypically In Stock -
LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances
SKU: 11995
Test Standards: IEC 61000-4-16, IEC 61000-4-19Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 HzSlew Rate: 100 V/µsInternal Power Amplifier: 250 WattsTypically In Stock -
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 Ohms -
ETS-lindgren 3148 200MHz-2GHz Log Periodic Dipole Array Antenna
SKU: 2514
Weight: 2.0 kg (4.5 lb)Connector: Type N femaleFrequency Range: 200 MHz – 2 GHzMaximum Continuous Power: 1 kWVSWR: 1.2:1 average 2.0:1 maximumInquire for Availability -
Com-Power LI-150C Line Impedance Stabilization Network
SKU: sku-890
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair
SKU: sku-881
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
MIL-STD-461 RS103 Radiated Susceptibility Test System
SKU: 122522
Applications: Radiated SusceptibilityFrequency Range: (4 kHz) 2 MHz - 40 GHzField Strength: 200 V/mIndustry: Military EMC TestingTest Standards: MIL-STD-461 RS103Typically In Stock -
Chroma 61704 3-Phase AC Power Source for MIL-STD-704 and RTCA DO-160 Testing
SKU: sku-872
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak) -
3ctest APS 40C10 Automotive Battery & Pulse Simulator
SKU: 22867
Output Voltage: -40 to 40 Volts (.2V steps)Output Current: -10 to 10 AmpsProduct Overview (Video): ISO 16750-2 Electrical Load Tests using the APS SeriesFrequency Range: up to 300 kHzBandwidth Response: 100 kHzIN STOCK -
Mil-STD-461 RS103 Electric Field Generator Test Setup
SKU: 12853
Max Field Strength: 500 V/mFrequency Range: (10 kHz) 2 MHz - 100 MHzRF Connectors: 7/16 femaleTest Standards: MIL-STD-461, DO-160Industries: Military and Aviation EMCTypically In Stock