Test Equipment by EMC & Compliance Standards

Standards Categories

CE Mark Testing

FCC Part 15

International (IEC/EN)

Automotive EMC Standards

Telecom Testing

Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

GTEM 250 Electromagnetic Transverse Waveguide Cell

SKU: sku-677

Max EUT Size: 8" x 8" x 6"

Frequency Range: DC - 20 GHz

Max Input Power (CW): 1000 Watts

Max Input Power (Pulse): 2,500 Watts

Dimensions (Footprint): 50" x 25" x 17"

Typical Configuration: 1PH/16 Amps AC, 250V/10A DC, RF feedthroughs N and SMA, Additional Passthrough, Window in Door

Options: Lighting, USB, RS-232, HDMI and other filters, Video Camera System, Safety Interlock, Gas/Water Feedthrough, Stand with Wheels

Standards Met: IEC/EN 61000-4-20, SAE J1752/3, IEC 62132-2 and IEC 61967-2, IEC 60118-13, and others

Applications: Radiated Emissions, Radiated Immunity

IN STOCK

VIEW PRODUCT Cart
AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m

SKU: sku-674

Weight: 3.8 lb.'s (1.72 kg)

Antennas: Biconical Antennas

Application/Test Type: Radiated emissions and immunity

Connector: N-type (female)

Dimensions: Height: 29 in. (73.7 cm) Width: 52.5 in. (133.4 cm)

Frequency Range: 20 MHz - 330 MHz

Gain: -22 to 2.8 dBi

Impedance: 50 Ohms nominal

Maximum Continuous Power: 1 Watts

Mounting Base: ABC-B (included)

VSWR: 2.0:1

VIEW PRODUCT Cart
Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

SKU: sku-673

Weight: approx. 8 kg

Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6

Dimensions: 670 mm x 70 mm x 80 mm

Frequency Range: 150 kHz to 1000 MHz

Max. Cable Diameter: 35 mm

Standards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326

VIEW PRODUCT Cart
Tektronix DPO4054 Digital Oscilloscope, 4 Channels, 500 MHz

SKU: 30047

Bandwidth: 500 MHz

Channels: 4

Maximum Waveform Capture Rate: 3,700 wfms/s

Sample Rates: Up to 5 GS/s on All Channels

Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

Inquire for Availability

VIEW PRODUCT Cart
Com-Power LI-3P-216 LISN, 9 kHz to 30 MHz, 50/250 uH, 500 VAC

SKU: 11665

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Dimensions: 19.3” x 13.9” x 2.3"

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$5,795.00

SHIPS IN 3-5 DAYS

ORDERING OPTIONS
ESD Guns IF Insulating Foil for ESD Compliance Testing

SKU: 11647

Cost New:

Was:

Price Now:

$197.00
3ctest TPS-CS115 Fast Square Wave Pulse Generator for MIL-STD CS115

SKU: sku-637

Standards Met: MIL-STD-461 CS115

Burst Duration: pulse width: more than 30 ns

Pulse amplitude: 0 - 2kV

Repetition rate: 1 - 50 Hz

Supply Voltage: 220 V, 50-60 Hz

In stock

VIEW PRODUCT Cart
Teseq PMU 6003 USB Power Meter/Sensor 9 kHz - 3 GHz

SKU: sku-606

Current rating: 100 mA at 5 V

Frequency Range: 9 kHz – 3 GHz

RF Connector: N male 50 Ω

Standards Met: IEC/EN 61000-4-3 IEC/EN 61000-4-6

Supply Voltage: min. 4.7 V / max. 9 V

VIEW PRODUCT Cart
3ctest TCXS111 Power Frequency Magnetic Field Coil for IEC61000-4-8, -9, -10

SKU: sku-602

# of turns: single

Dimensions: 1000*1000mm - Length*Width

Magnetic Field Strength: 1A/m ~ 400A/m

Standards Met: IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10

Generic Standards: IEC 61000-6-1, IEC 61000-6-2

4-6 Weeks

VIEW PRODUCT Cart
Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-600

Weight: 71.5 lbs

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 100 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Com-Power LI-3P-163 150kHz - 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-599

Weight: 52.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 63 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

VIEW PRODUCT Cart
Com-Power LI-3P-116 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-597

Weight: 27.5 lbs.

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 16 Amperes

Frequency Range: 150 kHz to 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Standards Met: ANSI C63.4, CISPR 16-1-2

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

CISPR 16-1-2: Yes

DO-160F: Yes

CISPR 22: Yes

FCC: Yes

ANSI C63.4: Yes

Cost New:

Was:

Price Now:

$395.00 - $5,350.00

ORDERING OPTIONS