- 
            Attenuator Set for IEC/EN 61000-4-6 Conducted RF ImmunitySKU: 11584 Power Handling: up to 500 WattsAttenuation: 3dB to 40dBConnectors: N-type typ. (BNC available)Frequency Range: DC to 1 GHz typ.VSWR: 1.2:1In Stock
- 
            DC400M-500 4 Port Dual Directional Coupler 10 KHz to 400 MHzSKU: 11951 Frequency Range: 0.01 MHz - 400 MHzCoupling Value: 40 ± 1.0 dB Max.Max Power Handling: 500 W CWConnectors: N Male, N Female (3)Flatness: ± 0.5 dB Max$295.00Typically In Stock
- 
            DP7 High Voltage Probe for Surge Generator Waveform VerificationSKU: 6533 Bandwidth: DC - 70 MHzAttenuation: 1:100 and 1:1000Accuracy: ±2%Input Voltage Range: < +700V for X100, < +7000V for X1000Output Voltage: ≤ + 7000V$185.00 - $1,850.00IN STOCK
- 
            ECO2G 2 GHz EMC Calibration Oscilloscope ESD Gun VerificationSKU: 5501 Sample Rate: 5 GSa/s (10 GSa/s ESR) ADC per analog channelRecord Length: up to 500 MptsWaveform Capture Rate: Up to 750,000 wfm/s (Sequence mode)Pre-Programmed Settings: IEC 61000-4-2 150pF/330 Ohm, All four R/C Combinations of ISO 10605Vertical Scales: 0.5 mV/div to 10 V/divIN STOCK
- 
            EFT-DLC-CAL Transducer Plate for Coupling Clamp CalibrationSKU: 12781 Connector Types: Fischer HV, SHV, BNCApplication: EFT Waveform Verification, IEC / EN 61000-4-4 Edition 3Standards Met: Calibration according to IEC / EN 61000-4-4 Edition 3Compatible Couplers: Any$1,475.00IN STOCK
- 
            EMI-AK40G Antenna Kit for EMI Radiated Emissions & Immunity TestingSKU: 12112 Frequency Range: 20 Hz to 40 GHzIncludes: Log, Biconical, Monopole, Passive Loop, Dual Ridge, Quad Ridge, Current ProbesTest Standards: FCC Part 15, MIL-STD-461, IEC 61000-6-3, IEC 61000-6-4Applications: EMC Precompliance Testing, Radiated Emissions, TEMPEST TestingIn Stock
- 
            ESD Soft Control Software for ESD Gun AutomationSKU: 21973 System Requirements: Windows 10 and Windows 11Communication Interfaces: USB, RS-232Operation: Remote control or Recording of Manual OperationProgram: Polarity, Frequency, Start-Stop, Ramping, Counter, Voltage StepsTest Standards: EN/IEC 61000-4-2IN STOCK
- 
            ETT Copper EMC Test Table/BenchSKU: 3379 Standards Met: CISPR 25, MIL-STD-461Applications: EV and Automotive, Conducted EmissionsAdditional Applications: Radiated Emissions, Radiated ImmunityDimensions: 2.5m x 1m x 0.9mPermissible Load: >500 LBsIN STOCK
- 
            GTEM 750 Transverse Electromagnetic (TEM) WaveguideSKU: 10685 Frequency Range (Radiated Emissions): DC to 20 GHzFrequency Range (Radiated Immunity): 80 MHz to 6 GHzMax EUT Size: 60 cm x 60 cm x 37.5 cmTypical VSWR: 1:1.2Applications: Radiated Immunity, Radiated EmissionsTypically In Stock
- 
            ISO 11452-2 Full ALSE Test SetupSKU: 10460 Frequency Range: 80 MHz - 18 GHzTest Severity Levels: 100 V/m Standard (up to 200 V/m Max)Applications: Radiated Immunity Testing, EV & Battery EMC TestingNormative References: ISO 11452-1Inquire for Availability
- 
            MIL-STD-461 CS101 Test Equipment Setup Rental PackageSKU: 22047 Test Standards: MIL-STD-461 CS101Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)Test Setup: Quick Start Guide ProvidedShipping: Same Day, Larger Systems go Freight$975.00 - $1,975.00Usually ships in 24 hours.
- 
            RESA Realtime EMC Spectrum AnalyzerSKU: 2075 Frequency Range: 9 kHz - 3.2/7.5/13.2/26.5 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)In Stock
 
 
             
                 
                 
                 
                 
                 
                 
                 
                 
                 
                 
                