SAE Categories
SAE Test Equipment
-
Bulk Current Injection Test Setup - 400mA Automotive
SKU: 2193
Test Capabilities: RF Conducted ImmunityStandards Met: ISO 11452-4Applications: Automotive Component Disturbance TestingBCI Test Levels (w/ built-in amplifier): 400mAFrequency Range (w/ built-in amplifier): 1 MHz - 400 MHzIN STOCK -
Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6
SKU: 10548
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mATypically In Stock -
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: 11334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3V$1,250.00 - $16,500.00Typically In Stock -
FCC F-150-1 7 GHz Bulk Current Injection Probe
SKU: 25366
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 Watts (30 minutes)Test Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: .47" ( 12mm )Frequency Range: 2.3 GHz – 7.0 GHz$45.00 - $1,495.00Inquire for Availability -
Fischer F-150 800 MHz - 2.1 GHz BCI Probe, 250 Watts
SKU: 25365
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 WattsTest Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: 1.25" ( 32mm )Frequency Range: 800 MHz - 2.1 GHz$295.00 - $1,495.00Inquire for Availability -
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock -
EM Test Automotive Test System for ISO 7637-2
SKU: 10596
ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohmInput: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200NMicropulse: Micropulse module for test pulses 1, 2A and 6Inquire for availability -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
AE Techron DSR 100 Ripple Generator and AC/DC Voltage Source
SKU: 11769
Test Standards: ISO 7637-4, ISO 21498Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesFrequency Range: DC - 300 kHzOutput Current: up to 400 AmpsTypically In Stock -
Inquire for Availability -
Amplifier Research CI00400AM4 BCI RF Conducted Immunity Generator
SKU: sku-1076
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-STD-461 CS114, ISO 11452-4, DO-160 Section 20Applications: BCI TestingCDN Test Levels (w/ built-in amplifier): 60VrmsBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµATypically In Stock -
MFG-1000 Magnetic Field Generator & Ripple Current Tester
SKU: 11959
Field Strength Range: 1000 A/m up to 1000 HzFrequency Rnange: DC to 250 kHzTest Standards: STD-461 (CE101, CS101, CS109), EN 61000-4-16, IEC / EN 61543Inquire for Availability