Description
The BT-AlphaS series is a range of class AB RF power amplifiers covering the 100kHz to 30MHz frequency range.
Tomco RF Amplifier BT01000-AlphaS .1 MHz - 30MHz Specifications
- Type: Class AB MOSFET
- Rated Power: 1000W minimum; PEP for input power of 0dBm
- P1dB: 800W minimum, Minimum output power at P1dB compression
- Gain: 60dB minimum
- Frequency: 0.1MHz-30MHz
- Gain flatness: ±1.5dB maximum (measured at 1/10th rated output power)
- Max. duty cycle: 20%: Maximum GATE duty cycle
- Max. pulse width; 10ms; Maximum GATE pulse width
- Rated power in CW mode: 100W;CW operation is automatically available at output power level less than approx. 10% of full rated power
- Pulse droop: 0.5dB maximum: Measured at max. pulse width at P1dB level
- Risetime: 200ns typical
- Falltime: 100ns typical
- Harmonics
- Odd: -20dBc typical, -10dBc max.
- Even: -30dBc typical, -20dBc max.
- Measured at 1dB below rated output power
- Spurious:<-70dBc maximum
- Output noise (blanked):<10dB above thermal (100kHz bandwidth)
- Phase change/power: <10? from -40dB to full power
- Phase stability:<1? across 10ms pulse
- Output sample: -60dB into 50 Ω (forward voltage sample)
- Input/output impedance: 50 Ω nominal
- Load VSWR: Tolerates at least 3:1 @ full rated power without shut down
- Gain control range: 10dB minimum for 0-5V control voltage; Control via parallel interface
- RF Input: 0dBm nominal, 10dBm for no damage
Videos
Custom Field
Max Frequency 30 MHz
Min Frequency 100 kHz
Output Power 800 Watts Pulse
Applications Particle, Plasma, Magnetic, Radar, NMR, MRI, EPR, ESR,ENDOR and NQR
AC Input Power 110-240V/1PH/1kVA
Gain 60dB