Signal Boosters

Signal Boosters Test Equipment, Systems & Solutions

• 

  PA2G Broadband Coaxial Preamplifier 9 kHz - 2 GHz

  SKU: 5573

  Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

  Frequency Range: 9 kHz - 2 GHz

  Gain: 30 dB

  Power Supply: 12V DC

  Test Standards: CISPR 11, CISPR 32, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $1,795.00

  IN STOCK

• 

  AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

  SKU: 10249

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 4 GHz

  Gain: 26 dB typical (22 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  VSWR: 2.0:1 Input; 1.7:1 Output

  Cost New:

  Was:

  Price Now:

  $550.00

  Typically In Stock

• 

  AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-213

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 37 dB typical (33 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA

  Maximum Continuous Power: +8 dBm @ 1 dB compression

  VSWR: less than 2.9:1 typical

  View Product Cart

• 

  AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

  SKU: sku-212

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Overcome attenuation problems at higher frequencies.

  Connector: 2.9mm(f) to 2.9mm(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 40 GHz

  Gain: 20 dB typical (15 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: less than 1.7:1 typical

  View Product Cart

• 

  AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

  SKU: sku-211

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

  Connector: SMA(f) to SMA(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 18 GHz - 26.5 GHz

  Gain: 32 dB typical

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: +6 dBm @ 1 dB compression

  VSWR: 1.7:1 typical

  EMC Standards: CISPR 11, CISPR 32, FCC Part 15

  View Product Cart

• 

  AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

  SKU: 2669

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 18 GHz

  Gain: 37 dB typical

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: + 10 dBm @ 1 dB compression

  VSWR: 2.5:1 typical

  Inquire for Availability

  View Product Cart

• 

  AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

  SKU: 10209

  Weight: 1.1 lbs. / 0.5 kg

  Application/Test Type: Improve overall system sensitivity for field measurements.

  Connector: N(f) to N(f)

  Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

  Frequency Range: 20 MHz - 7 GHz

  Gain: 30 dB typical (25 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

  Maximum Continuous Power: + 3 dBm @ 1 dB compression

  VSWR: 2.2:1 Input; 1.8:1 Output

  View Product Cart

• 

  Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

  SKU: sku-83

  Weight: 220 grams (0.3 Lbs)

  Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

  Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

  Dimensions: 39 mm x 88 mm x 36 mm

  Frequency Range: 1 GHz - 18 GHz

  Gain: 22 dB typical (± 3 dB flatness)

  Input: less than -10 dBm

  VSWR: less than 2:1 typical

  View Product Cart

• 

  Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

  SKU: sku-81

  Weight: 0.27 Lb's (127 grams)

  Connector: N-type 50 Ohms

  Dimensions: 28 mm x 95 mm x 27 mm

  Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)

  Gain: 12.5 dB (±0.3 dB flatness)

  Input: 0 dBm (107 dBμV)

  Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression

  VSWR: less than 1.5:1

  View Product View Product

• 

  AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

  SKU: 3727

  Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

  Connector: N(f) to N(f)

  Frequency Range: 20 MHz - 2000 MHz

  Gain: 30.4 dB typical (29.5 dB minimum)

  Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA

  Maximum Continuous Power: + 6 dBm @ 1 dB compression

  VSWR: 1.5:1 Input; 1.8:1 Output

  Test Standards: CISPR 11, CISPR 32, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $149.00

  Typically In Stock

  Ordering Options

• 

  PA2500M Low Noise Amplifier, 1 - 2500 MHz

  SKU: 18371

  Weight: 1.45 lbs (2.5 lbs with Internal Battery)

  Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

  Connector: N(f) to N(f) (Inquire for SMA or BNC)

  Dimensions: 4.25" x 2.31" x 6.73"

  Frequency Range: 1 MHz - 2500 MHz

  Gain: 31.5 dB typical (30 dB minimum)

  Input: 120 VAC regulated P/S or 12 VDC Battery

  Maximum Continuous Power: + 20 dBm @ 1 dB compression

  VSWR: 2:1 Max

  Test Standards: CISPR 11, CISPR 32, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $1,395.00

  In Stock

  Ordering Options

• 

  Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

  SKU: sku-80

  Weight: approx. 127 grams (0.3 Lb's)

  Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

  Dimensions: 28 mm x 95 mm x 27 mm

  Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

  Gain: 12.5 dB (±0.3 dB flatness)

  Input: 0 dBm (107 dBμV)

  Maximum Continuous Power: 12.5 dBm @ 1 dB compression

  RF Connector: IN: N-type (f); OUT: N-type (m)

  Inquire for Availability

  View Product Cart