EMC Test Equipment

Quick Links

Information

Viewed products

EMC Partner MIG-OS-OS1 Oscillatory Wave Generator for IEC 61000-4-18 Compliance View larger

EMC Partner MIG-OS-OS1 Oscillatory Wave Generator for IEC 61000-4-18

New

  • Parameter ramp feature / Electronic polarity change
  • High degree of automation without software
  • Solid state impulse switch and solid state polarity change (no mechanical switch, no spark gaps or tubes) - advantages: low jitters, no high frequency switching noise,
  • Microprocessor menu controlled, printer port and RS232 remote control

More details

Request Quote/More Info

Test Equipment Description

EMC Partner MIG-OS-OS1 Application:

The MIG-OS-OS1 includes damped oscillatory tester 1MHz and 100 kHz up to 3 kV in accordance with IEC 61000-4-18. This standard defines a dual output for differential mode tests. The two BNC monitor outputs allow monitoring the voltage wave shape by an oscilloscope.

Oscillatory Wave Generator according to IEC 61000-4-18 (slow wave), IEC 60255-22-1, ANSI C37.90.1. Requires CDN2000-06-25 or CDN-1P-16 OSI. 

Standards Met:

  • IEC 61000-4-18
  • ANSI C37.90
  • IEC 60255-22-1

EMC Partner MIG-OS-OS1 Benefits:

  • Reproducible test results between locations
  • IEC and ANSI impulses
  • Differential output

EMC Partner DOW Test Systems Accessories:


CDN-1P-04-16 OSI Manual single phase CDN with line voltages L to N=280V line current 16A. Coupling path selection, CM, L+N to PE for slow damped oscillatory waves 100kHz and 1MHz, 200 Ohm fast damped oscillatory waves only, 3, 10, 30MHz, 50 Ohm
CDN2000-06-25 480V Manual three phase CDN with line voltages L to N=280V and L to L=480V, line current 25A per phase. Coupling path selection EFT(5kV), DOW 100kHz and 1MHz (4kV), Surge and Ring up to 6kV. d.c. see user manual ! L-L=max. 600V, L-GND=max. 300V
CDN3000A-06-32 480V Three phase CDN with line voltages L to N=280V and L to L=480V, line current 32A per phase. Automatic coupling path selection for EFT, Surge, RING and Damped Oscillatory, Common mode coupling only up to max. 30MHz.
CDN3000A-06-32 690V Three phase CDN with line voltages L to N=400V and L to L=690V, line current 32A per phase. Automatic coupling path selection for EFT, Surge, RING and Damped Oscillatory. Common mode coupling only up to max. 30MHz.

30 other products in the same category: