Voltage Dips and Interruptions Testers Test Equipment, Systems & Solutions
-
Haefely PLINE 1610 Voltage Failure Simulator
SKU: 10503
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Voltage Range: 0 - 264 VoltsFrequency Range: 48 to 62 HzCurrent Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)Phase synchronization: Synchronous 0 to 360 resolution, AsynchronousTest duration: 1s to 100 hoursTrigger: Auto, Manual, External$1,275.00 - $19,750.00Typically In Stock -
Noiseken VDS-2002 Voltage Dip and Swell Simulator
SKU: 64232
EUT Input Voltage Range: 90 - 264 VAC 50/60Hz, 0-125 VDCEUT Output Voltage Range: 0 - Input Voltage RangeOutput Power Rating: 4.224kVAOutput Current Capability: 16 Amps continouslyRise time / fall time: 1〜5μs 100 ohm loadedTest Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29IN STOCK -
Rent Chroma 61605 Single Phase AC Power Source
SKU: sku-2125
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak)Output voltage: 6000 VA max, 2000 VA per phaseVoltage ranges: 150-300 Volts$1,295.00 -
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A
SKU: sku-549
Weight: app. 28kg;Current Rating: Max. 32ADimensions: 19"/6 HUDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Frequency: 50Hz/60Hz, Single phase applicationOutput: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panelPeak current: Better than 500ARepetition rate: 0.01s to 9,999sRise time: Between 1us and 5us for abrupt changes, generator loaded with resistive loadSupply Voltage: 115V/230V; +10/-15%Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)Trigger of bursts: Automatic -
Teseq INA 6501 Manual Step Transformer for AC Dips & Interruptions
SKU: sku-116
Accuracy: ±5%Input voltage UIN: 0 to 250 VAC, 50/60 HzOutput voltage UVAR: 4 steps: 0% - 40% - 70% - 80% of UINVoltage change with load: 00% output, 0 to 16 A less than 5%; 80% output, 0 to 20 A less than 5%; 70% output, 0 to 23 A less than 5%; 40% output, 0 to 40 A less than 5%$2,060.00 -
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
SKU: HAE-DIP116
Test Standards: IEC 61000-4-11Typically In Stock -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
3ctest Voltage Dips & Power Frequency Module (VMT, VVT, MFT)
SKU: sku-565
Applications: EMC Precompliance Testing, Conducted ImmunityTest Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Compatible Transient Generators: 3ctest CCS 600Inquire for Availability -
Schloder VIS 1700 Voltage Interruption Simulator
SKU: 21784
Communication: BNC outputs (on rear) for voltage, current and scope triggeringCoupling: BNCDips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29General Data: Technical DetailsMains & EUT Connections: 4mm banana lineOutput Current: AC max. 280 V, DC max. 3 6 0 VPeak inrush current capability: 16 AmpsPhase synchronization: at any phase position 0° - 360 °Test duration: 0.1sec - 9990sec, furthermore single event and continuous operationTest Voltage: AC max. 280 V ,DC max. 3 6 0 VApplications: EMC Precompliance Testing, Conducted ImmunityTypically In Stock -
Teseq INA 6502 PQF/Dip Transformer for NSG 3060
SKU: 3955
Test Standards: IEC/EN 61000-4-11Compatible Generators: Teseq NSG 3060, Teseq NSG 3040Applications: Conducted Immunity$549.00 - $1,600.00In stock