Contact us specifically for the Teseq INA 721-100 and INA 721-150

150 Ohm Adapter Set for IEC 61000-4-6 Calibration Jig/BCI Test

Condition:
New
Manufacturer:
The EMC Shop
Applications:
BCI CALIBRATION SETUP
Standards:
4-6

 

No reviews yet Write a Review
Availability:

Typically In Stock

SKU:
10856

 

 

Due to tariff increases, some items in our catalog are subject to additional costs when purchased.

Getting Started...

Check out our Google Reviews

Overview

The EMC Shop is stocking the elusive 100 ohm feedthrough adapters specified in IEC 61000-4-6 for the BCI calibration setup.

Included:

  • 150 Ohm to 50 Ohm Adapter (N-Type)
  • 150 Ohm Terminaction (N-Type)

Key Considerations

Manufacturer:
The EMC Shop
Applications:
BCI CALIBRATION SETUP
Standards:
4-6

Related EMC Equipment & Solutions

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

Teseq CDN S751A 75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing

SKU: sku-851

Weight: 1.5 kg (3.3 lbs)
Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Current Rating: 1000 mA maximum
Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)
Dimensions: 4 x 4 x 9.5 inches (10 cm x 10 cm x 24 cm); (CDN HDMI and CDN S752A: 28.8 cm 11 inches)
$1,245.00
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

SKU: sku-410

Weight: 17 kg (37.5 Pounds)
Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applications
Dimensions: 19"/3 HU
Frequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHz
Impedance: 50 Ohms
Inquire for Availability
VIEW PRODUCT Cart