Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
3ctest GN MT6 Transient Immunity Test Generator
SKU: 10541
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Applications: Conducted Immunity Testing, CE Marking, Medical DevicesMax EUT Voltage (w/ Built in CDN): 400 VoltsMax EUT Current (w/ Built in CDN): 20 AmpsPeak inrush current capability: 500 Amps (up to 2.5 kA)Typically In Stock -
Magnetic Field Immunity Test System per IEC 61000-4-39
SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock -
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
SKU: 8467
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, ISO 11452-4Applications: Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 50VrmsBCI Test Levels (w/ built-in amplifier): 10V/400mA/114 dBµATypically In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzIn Stock -
Yokogawa WT5000 Precision Power Analyzer
SKU: 8802
Input Elements: 4Max Current (per channel): 30 AmpsMax Voltage (per channel): 1000 VoltsHarmonics Measurement Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-12In Stock -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
Haefely PLINE 1610 Voltage Failure Simulator
SKU: 10503
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Voltage Range: 0 - 264 VoltsFrequency Range: 48 to 62 HzCurrent Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)Phase synchronization: Synchronous 0 to 360 resolution, Asynchronous$1,275.00 - $19,750.00Typically In Stock -
Rent Radiated Emissions Test System Using GTEM
SKU: 0869
Frequency Range: 30 MHz - 40 GHzDUT Size: up to 2' cubed (GTEM 750)EMI Measurements: FCC Part 15, CISPR 11, MIL-STD-461 and moreApplications: EMC Precompliance Testing, CE Marking, Radiated Emissions Testing$1,290.00 - $4,700.00IN STOCK -
Haefely MAG 1000 AC Magnetic Field Generator per IEC 61000-4-8
SKU: 1897
Test Standards: IEC 61000-4-8Max Continuous Field Strength: 1 - 120 A/mShort Duration Levels: Up to 1000A/mTest Times: 1 min to 8 HoursIn Stock -
3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network
SKU: 7271
EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wireEUT Load Capacity (DC): 450 V, 100 AFuse: 6 AMax Power Consumption: 200 WDimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 inIn Stock -
Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V
SKU: 7287
Voltage range: 0-1500 VCurrent Range: 0 -30 AResistance Range: 1.7 Ω - 3000 ΩOutput Capacitance: 60 µFFrequency Range: 45 - 65 Hz$1,400.00 - $14,000.00In Stock -
Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz
SKU: 12076
Frequency Range: 10 Hz - 400 kHzCompliance Standards: IEC62233 and EN 50366Magnetic Measurement Units: Select T (Tesla), G (Gauss) or A/mEMC Standards: EN/IEC 61000-4-8Inquire for Availability