Rent, buy or lease test equipment built according to the IEC/EN normative referenced in product certification standards. The EMC Shop supplies the equipment for CE, UL, FCC, TUV, CSA and other product marks for your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna
SKU: 2657
Max RF Input Power: 5,000 WattsAntenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)Application/Test Type: Radiated Immunity TestingDimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)Frequency Range: 80 MHz - 6 GHz$1,275.00 - $14,950.00Typically In Stock -
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe
SKU: 5497
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 1.5 to 1500 V/m (0.01 V/m)Frequency Range: 5 kHz to 9.25 GHzStandard Met: IEC/EN 61000-4-3Interface: Fiber-OpticTypically In Stock -
Teseq CDN M5 5-Line Coupling Network for AC Power Lines, 16-32 Amps
SKU: sku-227
Weight: 6.5 kg (14.3 LB.'s)Application/Test Type: 5 mains AC power lines emissions testing up to 32 Amps (3L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 32 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines
SKU: sku-222
Weight: 3.3 Lbs (1.5 kg)Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 ADimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)$790.00 -
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture
SKU: 10205
Weight: 9 Lb.'sApplication/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibratedDimensions: 10" x 7" x 6"Frequency Range: 20 Hz - 500 MHz -
AH Systems SAS-571 Broadband Double Ridge Horn Antenna
SKU: 4192
Weight: 3.5 lb.'s (1.59 kg)3dB Beamwidth (E-Field): 48°3dB Beamwidth (H-Field): 30°Antenna Factor (1 Meter): 22 to 44 dB/mAntennas: Double Ridge Guide Horn Antenna$249.00 - $395.00Typically In Stock -
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6
SKU: sku-122
Weight: approx. 5.5 kgDimensions: 670 mm x 100 mm x 79 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326 -
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6
SKU: sku-119
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)Connector: N-type femaleDimensions: 647 mm x 130 mm x 105 mm -
Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network
SKU: sku-90
Weight: 5 lbs. 2.3 kgApplication/Test Type: Four conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator
SKU: 10045
Test Standards: IEC/EN 61000-4-8Antennas: Teseq INA 701, 702 or 703Compatible Generators: Teseq NSG 3040 and NSG 3060 -
Teseq MFO 6501 Manual Power Line Frequency Magnetic Field Generator
SKU: 10043
Test Standards: IEC 61000-4-8Antennas: Teseq INA 701, 702 or 703Test Frequency: Selectable 50 Hz and 60 Hz ±3%Magnetic Field Levels: Antenna Dependent$195.00 - $1,095.00Inquire for Availability -
Teseq INA 703 Magnetic Field Coil for NSG 3040 & NSG 3060
SKU: 10042
Test Standards: IEC 61000-4-8# of turns: 1, 5, 37Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cmMounting Base: Rigid aluminum frame with castersRF Connector: 4 pole connector (INA 3250)$129.00 - $495.00Typically In Stock