EMC Test Equipment - Electric Field Strength Measurement - Isotropic Field Probes & Sensors - E-Field Probes up to 10 GHz

E-Field Probes up to 10 GHz Test Equipment, Systems & Solutions

Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing

SKU: 7384

Application/Test Type: Radiated Immunity

Field Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)

Frequency Range: 10 Hz to 8.2 GHz

Resolution: <0.01 V/m

Test Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20

Typically In Stock

VIEW PRODUCT Cart
Amplifier Research PL7004 800MHz - 3.6GHz Electric Field Pulse Laser Powered Probe

SKU: 11935

Amplitude Accuracy: Without correction factors applied: ±1.5 dB @ 1 GHz; With correction factors applied: Typical expanded measurement uncertainty (95% confidence interval), 0.8 dB, 800 MHz–1 GHz; 1.4 dB, 1GHz–3.6 GHz

Damage Level: 1000 V/m, Continuous Field or Pulsed Field

Frequency Range: 800MHz - 3.6GHz

Isotropic Deviation: ±1.0 dB @ 1 GHz. For improved accuracy, this probe should be used with a single axis aligned with the E-field being measured.

Operating Range: 80–800 V/m

Pulse Duration: 0.02% to 2%

Pulse Period: Up to 5 milliseconds between pulses (greater than 200 Hz pulse rate)

Pulse Width: 1 to 100 Microseconds

Relative Flatness: ±2.5 dB, 800 MHz-3 GHz; ±3.0 dB, 3.0GHz 3.6GHz

Temperature Stability: +0.5 dB Over Operating Temperature Range

Inquire for Availability

VIEW PRODUCT Cart
Amplifier Research FL7030 5 kHz - 30 MHz Electric Field Laser Powered Probe

SKU: 11934

Weight: 62.5 g (2.2 oz)

Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4

Analog Response Time: 20 msec/up to 50 samples per second, at FI7000 USB and GPIB interfaces

Calibration Data: Accredited Calibration Report (A2LA) supplied with probe

Damage Level: 1000 V/m continuous field

Data Returned From Probe: X, Y, Z axes, and Composite

Dimensions: 5.7 x 5.7 x 5.7 cm (2.25 x 2.25 x 2.25 in) 2.92 cm (1.15 in) DIA spherical housing 3.18 cm (1.25 in) sensor radome per axes

Fiber Optic Connectors: Two E2000 compact duplex connectors at 1 meter, includes fiber optic verification loop.

Isotropic Deviation: ± 0.5 dB @ 10 MHz ± 0.5 dB, 5 kHz–30 MHz (typical)

Linearity: ± 0.5 dB and ± 0.9 V/m

Operating Range: 1.5–300 V/m

Operating Temperature: 10˚C to 40˚C (50˚F to 104˚F) @ 5% to 95% RH non-condensing

Power Requirements: Laser powered from FI7000 interface

Rise time: Typical Analog 300nS

Temperature Stability: ± 0.5 dB over operating temperature range

VIEW PRODUCT Cart
Amplifier Research FA7006 6 GHz E-Field Probe Kit

SKU: 11933

Test Standards: IEC 61000-4-3

Accuracy: ±1.0dB @ 10MHz1 0.8dB, 100kHz–1GHz3,4 1.4dB, 1GHz–6GHz3,4

Damage Level: 1000 V/m

Dimensions: 5.7 x 5.7 x 5.7cm

Linearity: ±0.5dB

Minimum Pulse Width: 2μs

Operating Range: 9 – 900V/m

Rise time: Typical Analog 300nS

Temperature Stability: ±1.0dB, 10°C - 40°C8

Typically In Stock

VIEW PRODUCT Cart
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe

SKU: 5497

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 1.5 to 1500 V/m (0.01 V/m)

Frequency Range: 5 kHz to 9.25 GHz

Standard Met: IEC/EN 61000-4-3

Interface: Fiber-Optic

Battery Life: 60-80 hours

Dynamic Range: 1,5 to 1500 V/m, 60 dB single range

Typically In Stock

VIEW PRODUCT Cart
Narda PMM EP-601 10 kHz – 9.25 GHz Broadband Active Electric Field Probe

SKU: 5271

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 500 V/m (0.01 V/m)

Frequency Range: 10 kHz to 9.25 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: Fiber-Optic

Battery Life: 60-80 hours

Cost New:

Was:

Price Now:

$905.00 - $9,000.00

Inquire for Availability

ORDERING OPTIONS
ETS-Lindgren HI-4433-STE Isotropic Electric Field Probe

SKU: 9194

Isotropicity: ± 0.5 dB

Operating Temperature: 10ºC to 40ºC (50º F to 104ºF)

Fiber Optic Cable Connector: Standard FSMA

Dynamic Range: 30-3000 V/m

Frequency Response: 500 kHz to 5.0 GHz

Applications: Monitoring Electric Field Strengths

Test Standards: IEC/EN 61000-4-3

Cost New:

Was:

Price Now:

$1,025.00 - $10,250.00

Typically in Stock

ORDERING OPTIONS
Wavecontrol WPF6-HP Electric Field Probe for SMP Meters

SKU: 4423

Frequency range: 100 kHz - 6 GHz

Resolution: 0.02 V/m (until 7.5 V/m), 0.1 V/m (from 7.5 V/m to 130 V/m)

Dynamic Range: 70 dB

Sensitivity: 0.3 V/m

Measurement Range: 0.3 – 1000 V/m (CW), 0.3 – 20 V/m (RMS)

Linearity: ± 0.5 dB (0.5 V/m – 100 V/m)

Isotropic deviation: ± 1.2 dB (@ 2 GHz)

Attenuation at 50/60 Hz: > 80 dB

Cost New:

Was:

Price Now:

$695.00 - $995.00

In Stock

ORDERING OPTIONS
Narda PMM EP-600 Isotropic E-Field Probe 100 kHz-9.25 GHz

SKU: 6347

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.14 to 140 V/m (0.01 V/m)

Frequency Range: 100 kHz to 9.25 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: Fiber-Optic

Battery Life: 60-80 hours

Typically In Stock

VIEW PRODUCT Cart
Amplifier Research FP5000 Isotropic E-Field Probe, 10 kHz - 1 GHz

SKU: 4902

Frequency Range: 10 kHz - 1 GHz

Response Time: 40 msec. minimum

Isotropicity: +/-0.5 dB on three orthogonal axes

Sensitivity: 1-300 V/M

Sampling Rate: 1-26 samples/second

Applications: Monitoring Electric Field Strengths

Test Standards: IEC/EN 61000-4-3

Cost New:

Was:

Price Now:

$3,950.00

In Stock
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz

SKU: 57543

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 0.5 to 800 V/m (0.01 V/m)

Frequency Range: 100 kHz to 6 GHz

Standards Met: IEC/EN 61000-4-3

Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial

Battery Life: 60-80 hours

Typically In Stock

VIEW PRODUCT Cart