Standards Categories
Standards Test Equipment
-
AE Techron 7234 Industrial Power Amplifier/Battery Simulator
SKU: 4302
AC Power Adapter: Single phase, 120 VAC, 60 Hz, 20A service; (220-240 VAC, 50-60 Hz, 10A service model available)Frequency Range: DC—300 kHz (1 watt): +1 to -2.0 dBGain: Voltage Mode: 20 volts/volt Current Mode: 5 amperes/voltImpedance: 20k ohm differentialMax input power: ±10V, balanced or unbalancedTypically In Stock -
Schwarzbeck TF 130-150 Test Fixture per Ford FMC 1278 RI 130, RI 150
SKU: 2029
Material: Polyoxymethylene (=POM), Aluminium baseWeight: 7.3 kgOverall Dimensions: 1350 mm x 150 mm x 150 mmConnectors: N-Type (f)$395.00 - $3,375.0010-12 Weeks -
Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network
SKU: 10857
Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 100 AmperesStandards Met: ANSI C63.4, CISPR 16-1-2Frequency Range: 9 kHz - 30 MHzInductors: 50 µH$48.00 - $795.00Typically In Stock -
Haefely ONYX 16 ESD Simulator Gun for IEC 61000-4-2
SKU: 10536
Air Discharge Voltage Range: 1 to 16 kV or 1 to 30 kVBattery: at least 16 hour battery lifeContact Discharge Voltage Range: 1 to 16 kV or 1 to 30 kVFrequency Capabilities: single/0.1/0.2/0.5/1/2/5/10/20 HzHolding Time: More than 5 sec$295.00 - $1,395.00Ships Same Day -
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker
SKU: 1312
Applications: Flicker and Harmonics TestingTest Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreOutpur Power: 30 kVA (300 Volts)Output Current: inductive load: 41 A (43 A), resistive: 34 A (33 A), capacitive: 27 A (26 A) cont., 78 A 79 A) for 3 s, 300 A repetitive peakFrequency Range: 10 to 80 HzInquire for Availability -
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps
SKU: 11287
Application/Test Type: Power line conducted emissions testsCurrent Rating: 10 AmpsDimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cmFrequency Range: 9 kHz to 30 MHzInductors: 50 µH/250µH$195.00 - $1,975.00In Stock -
Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines
SKU: 6195
Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)Current Rating: 1 A (rated for Power over Ethernet)Insertion Loss: 9 dB at 100 MHzMains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)Standards Met: IEC 61000-4-5 Ed. 3RENTAL ONLY -
3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines
SKU: 30188
Test Standards: EN/IEC 61000-4-5Applications: Data lines Unshielded, Unsymmetrical Surge ImmunityData Rate: 100 Kbit/sSurge Voltage Handling: 6kVInquire for Availability -
Schwarzbeck NNBL 8226 MIL-STD-461 LISN
SKU: 6862
Frequency Range: 9 kHz - 100 MHzMax. cont. current: 70 AMax. current (limited time): 100 AMax Voltage (DC): 500 VMax. Voltage (AC 50/60 Hz): 250 V$2,775.00Typically in Stock -
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification
SKU: 11195
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12Applications: Electrical Transient and Noise, Surge Immunity, Power FailuresTest Setup: Conducted Immunity/Susceptibility Test SetupMax EUT Power: 600 Voltas @ 100 AmpsInquire for Availability -
3ctest EDS 30V Automotive ESD Simulator for ISO 10605
SKU: 6206
Test Standards: ISO 10605 Edition 3, IEC 61000-4-2Additional Test Standards: MIL-STD-461 CS118, RTCA DO-160, IEC 60601-1-2ESD Voltage Output Range (Air/Contact): 30 kVInterchangeable R/C Modules: YesBattery Life: 8 Hours$495.00 - $985.00IN STOCK -
EMC Partner ESD3000 ESD Generator
SKU: 10723
Weight: 1.7 kgBattery: at least 8 hour battery lifeVoltage Range: .08 up to 30kV depending on module typePre-Programmed IEC Levels: YesResolution: 100V steps$795.00 - $2,195.00Typically In Stock