Standards Categories
Standards Test Equipment
-
Teseq NSG 438 30kV ESD Simulator Gun
SKU: 10121
Standards Met: IEC 61000-4-2, ISO 10605Need to test now?: ESD Gun Rentals Ship Same DayVoltage Range: 200 V to 30k V (in 100 V steps)Polarity: Positive / negative / automatic changePre-Programmed IEC Levels: Yes$475.00 - $1,190.00IN STOCK -
3ctest GN MT6 Transient Immunity Test Generator
SKU: 10541
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Applications: Conducted Immunity Testing, CE Marking, Medical DevicesMax EUT Voltage (w/ Built in CDN): 400 VoltsMax EUT Current (w/ Built in CDN): 20 AmpsPeak inrush current capability: 500 Amps (up to 2.5 kA)Typically In Stock -
Magnetic Field Immunity Test System per IEC 61000-4-39
SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock -
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
SKU: 8467
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, ISO 11452-4Applications: Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 50VrmsBCI Test Levels (w/ built-in amplifier): 10V/400mA/114 dBµATypically In Stock -
EM Test UCS 200N50 Automotive Transient Simulator
SKU: 11183
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesStandards Met: ISO 7637, DC 10614, SAE J1113,Max EUT DC Voltage (w/ Built In CDN): 80 VoltsMax EUT DC Current (w/ Built In CDN): 50 AmpsPeak Inrush Current Capability: 100 Amps$975.00 - $5,495.00In Stock -
R&S ESW Series EMI Test Receiver
SKU: 11722
Frequency Range: 1 Hz up to 8, 26.5, or 44 GHzMeasurement Bandwidth: 1 Hz to 10 MHz (optional 80 MHz)Noise indication: < -5 dBµVCompliant per: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC1 dB compression nominal @ 1 GHz: +15 dBmTypically In Stock -
Lumiloop LSProbe 2.0 CW and Pulse Field Probe, 9 kHz - 18 GHz
SKU: 51903
Application/Test Type: Radiated ImmunityField Strength Range: <1 V/m to >1.000 V/mFrequency Range: 9 kHz to 18 GHz (26.5 GHz)Resolution: 0.05 Volts per meterTest Standards: MIL-STD 461 RS103, DO-160Typically In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzIn Stock -
Yokogawa WT5000 Precision Power Analyzer
SKU: 8802
Input Elements: 4Max Current (per channel): 30 AmpsMax Voltage (per channel): 1000 VoltsHarmonics Measurement Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-12In Stock -
Radiated Emissions Test Equipment System
SKU: 12013
Technical Support: FCC and iNarte TechniciansTest Setup: Quick Start Guide ProvidedShipping: Same Day, Larger Systems go FreightApplications: EMC Precompliance Testing, Radiated EmissionsFrequency Ranges: 2 Hz - 44 GHz$795.00 - $3,795.00Usually ships in 24 hours. -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
PA40G10M Millimeter-Wave Low Noise Amplifier
SKU: 1888
Max Frequency: 40 GHzMin Frequency: 10 MHzOutput Power: +18 dBm (P1dB)Gain: 40 dB typicalMax RF Input Power: +6 dBm @ 1 dB compression$495.00 - $6,975.00IN STOCK