Standards Categories
Standards Test Equipment
-
Bulk Current Injection Test Setup - 400mA Automotive
SKU: 2193
Test Capabilities: RF Conducted ImmunityStandards Met: ISO 11452-4Applications: Automotive Component Disturbance TestingBCI Test Levels (w/ built-in amplifier): 400mAFrequency Range (w/ built-in amplifier): 1 MHz - 400 MHzIN STOCK -
AMA60M9k MIL-STD Active Monopole 9 KHz - 60 MHz
SKU: 4364
Antenna Factor (1 Meter): 0 dB/mAntennas: Monopole AntennasApplication/Test Type: Radiated Emissions, Military EMC, Precompliance EMC tesingConnector: BNC (female)Dimensions: Ground Plane Dimensions: 18 in. X 18 in. (45.7 cm x 45.7 cm) Optional 24" (60cm) is available Rod Length: 8.5 in. - 43 in. (21.6 cm x 109.2 cm)$245.00 - $2,975.00Typically In Stock -
PA50G 10 MHz - 50 GHz, RF Preamplifier, 30 dB Gain
SKU: 8248
Application/Test Type: Overcome attenuation problems at higher frequencies.Connector: 2.4mm(f) to 2.4mm(f)Frequency Range: 10 MHz - 50 GHzGain: 25 dB typical$795.00 - $9,975.00In Stock -
BA330 EMI Biconical Antenna, 20 MHz - 330 MHz
SKU: 22018
Weight: 4.3 lb's (1.95 kg)Antenna Factor (1 Meter): 8.5 to 21.5 dB/mConnector: N-Type, femaleDimensions: 29" x 52.5" (73.7cm x 134cm)Frequency Range: 20 MHz to 330 MHzTypically in Stock -
3ctest AWG 100 Arbitrary Waveform Generator for Automotive EMC
SKU: 11689
Output Channels: 2 Standard (4 Optional)Waveform Types: DC wave, ramps, sine, sweep frequency, exponential, frequency modulation/amplitudAdjustable Waveform Parameters: Amplitude, duration, frequency, DC offset, rectification, duty cycle, phase angle, trigger, noiseWaveform Voltage Amplitude: 0 to ±10.00 VWaveform Output Rat: 25 MSPS per channelIn Stock -
Rent ETS-Lindgren 5402 GTEM Test Cell for Small DUT
SKU: 10839
Features: Ships fully assembled, easy unpack and setupApplications: Radiated Emissions, RF/Radiated Susceptibility TestingMax DUT Size: 8" x 8" x 6"Test Standards: FCC Part 15, IEC 61000-4-3$1,750.00 - $17,500.00In Stock -
EM Test PFS 200N30 Simulator for DC Voltage Drops & Micro-interruptions
SKU: 2806
Applications: Automotive Power Fail Simulator For Voltage Dips and InterruptionsStandards Met: ISO 16750-2OEM Standards Met: BMW GS 95003-2, Fiat 9.90110, Ford EMC-CS-2009.1, GMW 3172, Hyundai Kia ES, IVECO 16-2103, Mack Trucks 606GS15, Mitsubishi ES-X82010, PSA B21 7110, Volvo STD 515-003, Ford FMC 1278, BMW GS 95024-2-2, Jaguar JLR-EMC-CS, Tesla TS-0000425-05Max EUT DC Voltage (W/ Built In CDN): 80 VoltsMax EUT DC Current (W/ Built In CDN): 30 Amps$459.00 - $1,095.00IN STOCK -
3ctest ETS 160MB Multiple Burst Lightning Test System
SKU: 01753
Application/Test Type: PIN Injection test & Cable bundle test (single stroke)Impedance: 1Ω, 5ΩOutput: single strokePeak current: 1600APolarity: +/-Inquire for Availability -
3ctest TPS-CS115 Fast Square Wave Pulse Generator for MIL-STD CS115
SKU: 9397
Standards Met: MIL-STD-461 CS115Burst Duration: pulse width: more than 30 nsPulse amplitude: 0 - 2kVRepetition rate: 1 - 50 HzSupply Voltage: 220 V, 50-60 HzIn Stock -
3ctest RWS 600 Ring Wave Generator for IEC 61000-4-12
SKU: 10595
Display Interface: 5.7 inch TFT touch screenPhase synchronization: 0°-360°, 1° step or randomPolarity: Positive. negative, alternatingPulse current (short circuit): 500A ± 10% at 12Ω; 200A ± 10% at 30ΩPulse voltage (open circuit): 0.25 kV–6.0kV ± 10%4-6 Weeks -
3ctest PFS-A Series Voltage Interruption Simulator
SKU: 2686
DUT supply voltage: 0 to 80 VDUT supply current: 50 AmpsPeak current: 100A duration 500 msSwitching Time: ≤ 200ns (meets GM3172 9.2.18) And compatible with ≤ 1us (LV124, VW 80000, etc.)Fall Duration: 1us – 1 sIn Stock -
Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6
SKU: 10548
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mATypically In Stock