Normative References Categories
Normative References Test Equipment
-
3ctest GN MT6 Transient Immunity Test Generator
SKU: 10541
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Applications: Conducted Immunity Testing, CE Marking, Medical DevicesMax EUT Voltage (w/ Built in CDN): 400 VoltsMax EUT Current (w/ Built in CDN): 20 AmpsPeak inrush current capability: 500 Amps (up to 2.5 kA)Typically In Stock -
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
SKU: 8467
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, ISO 11452-4Applications: Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 50VrmsBCI Test Levels (w/ built-in amplifier): 10V/400mA/114 dBµATypically In Stock -
R&S ESW Series EMI Test Receiver
SKU: 11722
Frequency Range: 1 Hz up to 8, 26.5, or 44 GHzMeasurement Bandwidth: 1 Hz to 10 MHz (optional 80 MHz)Noise indication: < -5 dBµVCompliant per: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC1 dB compression nominal @ 1 GHz: +15 dBmTypically In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzIn Stock -
Yokogawa WT5000 Precision Power Analyzer
SKU: 8802
Input Elements: 4Max Current (per channel): 30 AmpsMax Voltage (per channel): 1000 VoltsHarmonics Measurement Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-3-12In Stock -
3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12
SKU: 11918
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and moreApplications: Flicker and Harmonics TestingCurrent Handling: 32 Amps per phaseInquire for Availability -
LPA7G 290 MHz - 7 GHz Log Periodic Antenna
SKU: 9006
Antenna Factor (1 Meter): 15 to 47 db/mApplications: EMC Precompliance TestingDimensions: 26.3" x 20.1"Frequency Range: 290 MHz - 7 GHzGain: 5.8 dBi$395.00 - $4,395.00In Stock -
Haefely PLINE 1610 Voltage Failure Simulator
SKU: 10503
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Voltage Range: 0 - 264 VoltsFrequency Range: 48 to 62 HzCurrent Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)Phase synchronization: Synchronous 0 to 360 resolution, Asynchronous$1,275.00 - $19,750.00Typically In Stock -
Rent Radiated Emissions Test System Using GTEM
SKU: 0869
Frequency Range: 30 MHz - 40 GHzDUT Size: up to 2' cubed (GTEM 750)EMI Measurements: FCC Part 15, CISPR 11, MIL-STD-461 and moreApplications: EMC Precompliance Testing, CE Marking, Radiated Emissions Testing$1,775.00IN STOCK -
Schwarzbeck FMZB 1519 C Active Magnetic Loop Antenna
SKU: 8581
Frequency Range: 9 kHz - 30 MHzAntenna Factor for fict. E - field strength: 20 dB/mAntenna Factor for H - field strength: -31.5 dB/ΩmLoop Diameter: 0.5 mFrequency Response: < +/- 1 dB$5,095.00Typically in Stock -
Haefely MAG 1000 AC Magnetic Field Generator per IEC 61000-4-8
SKU: 1897
Test Standards: IEC 61000-4-8Max Continuous Field Strength: 1 - 120 A/mShort Duration Levels: Up to 1000A/mTest Times: 1 min to 8 HoursIn Stock -
Narda PMM 7010 EMI Test Receiver
SKU: 10025
Frequency Range: 9 kHz to 3 GHzApp Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector functionPre-programmed Test Limits: CISPR 11, CISPR 22Sweep/Test Speed: Slow$495.00 - $2,375.00IN STOCK