RF & Antenna Signal Boosters

(Showing 12 of 12)

The EMC Shop stocks RF & Antenna Signal Boosters for EMC and other measurement applications. Rentals ship the same day, accredited calibrations available.

Show 12

RF & Antenna Signal Boosters Test Equipment, Systems & Solutions

  • AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

    AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

    SKU: 10249

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 4 GHz
    Gain: 26 dB typical (22 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    VSWR: 2.0:1 Input; 1.7:1 Output
    $550.00
    Typically In Stock
  • AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

    AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

    SKU: sku-213

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.
    Connector: 2.9mm(f) to 2.9mm(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 37 dB typical (33 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA
    Maximum Continuous Power: +8 dBm @ 1 dB compression
    VSWR: less than 2.9:1 typical
    View Product
  • AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

    AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

    SKU: sku-212

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Overcome attenuation problems at higher frequencies.
    Connector: 2.9mm(f) to 2.9mm(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 20 dB typical (15 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: +6 dBm @ 1 dB compression
    VSWR: less than 1.7:1 typical
    View Product
  • AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

    AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

    SKU: sku-211

    Weight: 1.1 lbs. / 0.5 kg
    Connector: SMA(f) to SMA(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 26.5 GHz
    Gain: 32 dB typical
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: +6 dBm @ 1 dB compression
    VSWR: 1.7:1 typical
    EMC Standards: CISPR 11, CISPR 32, FCC Part 15
    View Product
  • AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz - The EMC Shop

    AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

    SKU: 2669

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 18 GHz
    Gain: 37 dB typical
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: + 10 dBm @ 1 dB compression
    VSWR: 2.5:1 typical
    Inquire for Availability
    View Product
  • AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

    AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

    SKU: 10209

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 7 GHz
    Gain: 30 dB typical (25 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: + 3 dBm @ 1 dB compression
    VSWR: 2.2:1 Input; 1.8:1 Output
    View Product
  • Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

    Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

    SKU: sku-83

    Weight: 220 grams (0.3 Lbs)
    Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments
    Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms
    Dimensions: 39 mm x 88 mm x 36 mm
    Frequency Range: 1 GHz - 18 GHz
    Gain: 22 dB typical (± 3 dB flatness)
    Input: less than -10 dBm
    VSWR: less than 2:1 typical
    View Product
  • Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

    Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

    SKU: sku-81

    Weight: 0.27 Lb's (127 grams)
    Connector: N-type 50 Ohms
    Dimensions: 28 mm x 95 mm x 27 mm
    Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)
    Gain: 12.5 dB (±0.3 dB flatness)
    Input: 0 dBm (107 dBμV)
    Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression
    VSWR: less than 1.5:1
    View Product
  • AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

    AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

    SKU: 3727

    Connector: N(f) to N(f)
    Frequency Range: 20 MHz - 2000 MHz
    Gain: 30.4 dB typical (29.5 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA
    Maximum Continuous Power: + 6 dBm @ 1 dB compression
    VSWR: 1.5:1 Input; 1.8:1 Output
    Test Standards: CISPR 11, CISPR 32, FCC Part 15
    $149.00 - $1,250.00
    Typically In Stock
    Ordering Options
  • PA2500M Low Noise Amplifier, 1 - 2500 MHz - The EMC Shop

    PA2500M Low Noise Amplifier, 1 - 2500 MHz

    SKU: 18371

    Weight: 1.45 lbs (2.5 lbs with Internal Battery)
    Connector: N(f) to N(f) (Inquire for SMA or BNC)
    Dimensions: 4.25" x 2.31" x 6.73"
    Frequency Range: 1 MHz - 2500 MHz
    Gain: 31.5 dB typical (30 dB minimum)
    Input: 120 VAC regulated P/S or 12 VDC Battery
    Maximum Continuous Power: + 20 dBm @ 1 dB compression
    VSWR: 2:1 Max
    Test Standards: CISPR 11, CISPR 32, FCC Part 15
    $1,395.00 - $1,695.00
    In Stock
    Ordering Options
  • Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz - The EMC Shop

    Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

    SKU: sku-80

    Weight: approx. 127 grams (0.3 Lb's)
    Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.
    Dimensions: 28 mm x 95 mm x 27 mm
    Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)
    Gain: 12.5 dB (±0.3 dB flatness)
    Input: 0 dBm (107 dBμV)
    Maximum Continuous Power: 12.5 dBm @ 1 dB compression
    RF Connector: IN: N-type (f); OUT: N-type (m)
    Inquire for Availability
    View Product