Test Type Categories
Test Type Test Equipment
-
Wavecontrol SMP3 RF Field Meter
SKU: 8899
Frequency Range: DC to 60 GHzBattery Life: >24 HoursReadout Values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)Measurement Range: 0.2 - 1000 V/mHigh Pass Filters: 1 Hz, 10 Hz, 25 Hz and 100 HzTypically In Stock -
Teseq NSG 438 30kV ESD Simulator Gun
SKU: 10121
Standards Met: IEC 61000-4-2, ISO 10605Need to test now?: ESD Gun Rentals Ship Same DayVoltage Range: 200 V to 30k V (in 100 V steps)Polarity: Positive / negative / automatic changePre-Programmed IEC Levels: Yes$475.00 - $1,190.00IN STOCK -
Narda NBM-550 Broadband Field Meter, 100 kHz - 60 GHz
SKU: 11612
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: NiMH rechargeable batteries 4 x AA size (Mignon), 2500 mAhDimensions: 19.5 mm in heightFrequency Range: 100 kHz - 60 GHzOperation Time: 20 hours (backlight off, no GPS) 12 hours (permanent backlight, no GPS) 10 hours (GPS receiver connected, no backlight)Typically In Stock -
3ctest GN MT6 Transient Immunity Test Generator
SKU: 10541
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Applications: Conducted Immunity Testing, CE Marking, Medical DevicesMax EUT Voltage (w/ Built in CDN): 400 VoltsMax EUT Current (w/ Built in CDN): 20 AmpsPeak inrush current capability: 500 Amps (up to 2.5 kA)Typically In Stock -
Magnetic Field Immunity Test System per IEC 61000-4-39
SKU: 88641
- Coil sets with matching network, stand and corresponding cables for different frequency ranges
- Utilized with the RFCI-MIL and preamplifier as a complete test set for IEC 60601-1-2
- System achieved radiated and magnetic field immunity tests according to IEC 61000-4-39
- Software for impedance matching between amplifier and loop sensor
- Rentals Ship Same Day
Typically In Stock -
RFCI-75 RF Conducted Immunity Generator, 100 kHz - 400 MHz
SKU: 8467
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, ISO 11452-4Applications: Vehicle Component Disturbance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 50VrmsBCI Test Levels (w/ built-in amplifier): 10V/400mA/114 dBµATypically In Stock -
PMM EP-604 300 kHz – 26.5 GHz Broadband Active Electric Field Probe
SKU: 8554
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.4 - 800 V/m (0.01 V/m)Frequency Range: 300 kHz to 26.5 GHzStandards Met: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Interfaces: Fiber-Optic$500.00 - $3,000.00Typically In Stock -
EM Test UCS 200N50 Automotive Transient Simulator
SKU: 11183
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesStandards Met: ISO 7637, DC 10614, SAE J1113,Max EUT DC Voltage (w/ Built In CDN): 80 VoltsMax EUT DC Current (w/ Built In CDN): 50 AmpsPeak Inrush Current Capability: 100 Amps$975.00 - $5,495.00In Stock -
Narda NBM-520 Broadband Field Meter, 100 kHz - 90 GHz
SKU: 6278
Measurement Units: V/m, A/m, mW/cm² or W/m², % for shaped probesBattery Life: 20 hoursRecharging Time: 2 hoursCalibration Status: NIST (5/22/2023)PC Interface: Fiber Optic via USB (6 ft cable)In Stock -
Lumiloop LSProbe 2.0 CW and Pulse Field Probe, 9 kHz - 18 GHz
SKU: 51903
Application/Test Type: Radiated ImmunityField Strength Range: <1 V/m to >1.000 V/mFrequency Range: 9 kHz to 18 GHz (26.5 GHz)Resolution: 0.05 Volts per meterTest Standards: MIL-STD 461 RS103, DO-160Typically In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzIn Stock -
Narda FieldMan 0 Hz to 90 GHz All-in-One Electromagnetic Field Meter
SKU: 12955
Frequency Range: 0 Hz/1 Hz/100 kHz to 90 GHzLogging Info: Temperature, Humidity, Air Preassure, Geolocation, Distance to GroundElectric Field Units: V/m, mW/cm2 , W/m2 , % of standard (depending on the connected probe)Magnetic Field Units: A/m, Tesla, Gauss, mW/cm2 , W/m2 , % of standard (depending on the connected probe)Compliance Standards: 2013/35/EU, IEC/EN 62311, ICNIRP 1998, ICNIRP 2010, IEC/EN 62233, GB-8702-2014, EMFV 2016$495.00 - $1,850.00Typically In Stock