The EMC Shop stocks equipment for unique test and measurement applications.
Inquire for Lead Time
Test Type Categories
Test Type Test Equipment
-
-
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
ISO 11452-4 Turn Key Solution for Harness Excitation Methods (BCI and TWC)
SKU: 10459
Test Capabilities: RF Conducted ImmunityStandards Met: ISO 11452-4Applications: Automotive Component Disturbance TestingBCI Test Levels (w/ built-in amplifier): 1000mAFrequency Range (w/ built-in amplifier): 9 kHz - 1 GHzTypically In Stock -
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing
SKU: 8250
Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV stepStandards Met: IEC 61000-4-2, ISO 10605Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VAContact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV stepTypically In Stock -
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6
SKU: 11251
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 40VrmsBCI Test Levels (w/ built-in amplifier): 8VrmsTypically In Stock -
Teseq NSG 3040 Transient Immunity Test System
SKU: 4141
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT Voltage (w/ Built in CDN): 264 VoltsMax EUT Current (w/ Built in CDN): 16 Amps$1,495.00 - $17,750.00In Stock -
Amplifier Research PM2003 Power Meter, 3 Channels
SKU: 8179
Interfaces: Inputs: Rear panel HEAD connectors and rear panel IEEE-488 connector standard. Outputs: Rear panel PWR/REF connector, 0dBm, 50 MHz. Rear panel RECORDER BNC connector, 0 to 10V into 1mW.Frequency Range: 10 kHz to 40 GHz, power head dependentChannels: 3Power Measurement Range: -70dBm to +44dBm, power head dependent$450.00 - $4,750.00IN STOCK -
SS400M4k EMC CS Power Amplifier 4 kHz to 400 MHz
SKU: 9159
RF Output Power: 75 - 250 WattsFrequency Range: 4 kHz - 400 MHz (Power derated from 4 - 9 kHz)Applications: Bulk Current Injection TestingMax Input Power: 0 dBmLoad VSWR: 100% mismatch tolerantTypically in Stock -
Keysight RF Power Measurement Equipment Package
SKU: 31456
Frequency Range: DC - 40 GHz (Sensor Dependent)Power Range: -70 to +44 dBmMeasurement Types: Average, Pulse, Very Low Frequency (VLF)Applications: Radiated Immunity TestingTest Standards: IEC/EN 61000-4-3, MIL-STD-461 RS103, DO-160 Section 20, SAE J1113/4$325.00 - $995.00Typically In Stock -
EMC Partner MIG1206 12kV Surge Generator
SKU: 6527
Telecom Standards: IEC/EN 61000-4-5 , ITU K-series and IEC 60950EMC Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Max EUT Voltage: 480 VoltsMax EUT Current: 32 AmpsCombination/Wave Surge Output Voltage: 12.5 kVIN STOCK -
Keithley 2308 Portable Battery Simulator
SKU: 2350
Channels: 2 (Charger and Battery)DC Current Output: 5 AmpsDC Voltage Output: 15 VoltsCurrent Measurement Modes: Pulse, Burst, Long Integration$259.00 - $3,965.00IN STOCK