The EMC Shop stocks equipment for unique test and measurement applications.
$1,285.00 - $12,830.00
Lead Time 2-4 Weeks
Test Type Categories
Test Type Test Equipment
-
-
LANGER P512 RF Power Injection and Measurement IEC 62132-4
SKU: 30056
High power injection: 2 W at 12 GHzRF-Measurements: Up to 12 GHzAttenuation: Less than 3 dB up to 12 GHzSWR: lower than 2Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply UnitTypically In Stock -
NH Research 9200 Battery Cell, Pack and Module Test System
SKU: 6698
DC Voltage Output: 40 VoltsDC Current Output: 2,400 AmpsCharge/Discharge Modes: Constant-Voltage(CV), Current(CC), Power(CP), Resistance(CR)$2,250.00 - $4,500.00In Stock -
Tektronix TDS3052C Oscilloscope 500 MHz
SKU: 12247
Bandwidth: 500 MHzChannels: 2Sample rates on all channels: 5.0 GS/sstandard record length on all channels: 10 kcontinuous waveform capture rate: 3,600 wfms/s$250.00 - $2,500.00In Stock -
LISN-CISPR16-100A 3-Phase, 100 Amp Line Impedance Stabilization Network
SKU: 12114
Current Rating: 100 Amps continuousFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeApplications: Conducted Emissions TestingStandards Met: CISPR 16-1-2; VDE 0876; FCC part15; MIL-STD 461$7,600.00Typically In Stock -
R&S FSL3 Spectrum Analyzer
SKU: 11988
Frequency Range: 9 kHz - 3 GHzCondition (5-10 Scale): 9 (Good)Need it Fast?: Spectrum Analyzer Rentals Ship Same Day$195.00 - $3,500.00In Stock -
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: sku-1917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsTypically In Stock -
Thermo Keytek ECAT Transient Generator System
SKU: 11321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864In Stock -
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz
SKU: sku-80
Weight: approx. 127 grams (0.3 Lb's)Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.Dimensions: 28 mm x 95 mm x 27 mmFrequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)Gain: 12.5 dB (±0.3 dB flatness)Inquire for Availability -
Pearson 411 Surge Current Monitor up to 5kA Peak Current, 1Hz to 20 MHz
SKU: P-411
AC Current Handling (DC-400Hz): 50 AmpsRF Current Handling (CW/Pulse): 50/5,000 AmpsStyle: Fixed WindowDiameter: 0.5"Transfer Impedance: 1 OhmSEVERAL IN STOCK