Refurbished RF Test Equipment

Please note this list may not be up to date, contact us for specific rf test equipment requirements to see what offers are available. The EMC Shop routinely acquires general purpose RF equipment for rentals and short term projects. Recycling this equipment is an efficient way to explore new areas and supply customers tools at a good rate.

Refurbished RF Test Equipment There are 20 products.

per page
Showing 1 - 12 of 20 items
    • Full-vector network and spectrum measurement and analysis
    • Wide dynamic range network measurement with fast sweep speeds
    • +/-0.05 dB /+/-0.3deg dynamic magnitude/phase accuracy
    • Extremely fast narrowband spectrum measurement
    • Impedance analysis option and test kit available
    • -145 dBm/Hz sensitivity for spectrum analysis
    • Built-in IBASIC for easy test automation
    • Time-gated spectrum analysis option
    • Color TFT display and built-in disk drive/RAM disk
    In Stock
    • 50 GHz max frequency
    • Carry industry’s first 50 GHz handheld µW analyzer: standard model includes cable and antenna analyzer
    • Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
    • Save time by measuring DTF and TDR in a single sweep
    • Simultaneously measure all four S-parameters
    • Make accurate SA measurements (± 0.5 dB) without needing warm-up
    • Easily measure average and pulse power with a USB sensor
    • Lightest all-in-one analyzer at only 7.1 lb. (3.2 kg)
    $369.00
    In Stock
    • 30 MHz to 40 GHz Frequency range 
    • -60 dBm to +20 dBm Measurement range
    • 125 MHz RF Channel Video Bandwidth 
    • < 5 ns RF Channel Rise Time
    • Overall Accuracy 0.2 dB
    • 100 ps Time Resolution 
    • Min Pulse Width / Max PRF 6 ns / 50 MHz
    • 2 Channels RF and 2 Trigger
    In Stock
    • 80 MHz to 1 GHz Frequency Range
    • 40 dB ±1 dB Coupling
    • 200 Watt CW Maximum Input Power
    • Flatness: ±1 dB Max.
    • VSWR: 1.30:1 Max.
    • Directivity: 20 dB Typical
    • SMA Connections
    • Package with an RF Power Amplifier
    • Suitable for IEC 61000-4-3, IEC 60601-1-2
    In Stock
    • 10 Hz to 40 GHz 
    • Up to 160 MHz signal analysis bandwidth
    • Convenient, intuitive operation with touchscreen based user interface 5 GHz
    • 0.4 dB level measurement uncertainty up to 7 GHz
    • –110 dBc (1 Hz) phase noise at 10 kHz frequency offset
    • +15 dBm third-order intercept (TOI)
    • Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz; with R&S®FSV-B24 preamplifier: –162 dBm at 30 GHz
    • General-purpose measurement applications for phase noise, noise figure, vector signal analysis, analog demodulation, EMI diagnostics
    In Stock
    • Rentals Ship Immediately
    • Typical Configuration:
      • B25 - 25 MHz Analysis Bandwidth
      • P03 - 100 kHz - 3.6 GHz Preamplifier
      • PFR - Precision Frequency Reference
      • EMC - Basic precompliance EMI features
      • 1FP/2FP/3FP - LTE, CDMA, GSM and other Communications Tests
    In Stock
    • Resolution bandwidth 1 Hz to 10 MHz
    • Displayed average noise level -155 dBm (1 Hz)
    • Phase noise -113 dB (1 Hz) at 10 kHz
    • Total measurement uncertainty 0.5 dB
    • Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard
    In Stock
    • Frequency range: 5 kHz to 1 GHz, Upgradable to 2 GHz or 3 GHz
    • Resolution bandwidth settings down to 1 Hz
    • 10.1" WXGA (1366 x 768 pixel) display
    • Wi-Fi-enabled w/ remote control (included)
    • Easy virtual control w/ iOS/Android/PC
    • Low noise floor / High max. input power
    • Receiver mode for EMI debugging on circuit boards, integrated circuits, cable shielding, etc.
    • Three-year warranty
    Typically In Stock
    • 100kHz to 1GHz Frequency Range
    • Displayed average noise level (DANL) <-155dBm/Hz typ. with preamplifier on
    • Minimum resolution bandwidth (RBW) 100Hz
    • Phase noise <-80dBc/Hz @10kHz offset
    • Level measurement uncertainty <1.5dB
    • 8" (800 x 480) high-definition display
    • Linear and logarithmic frequency axis
    • Connectivity: LAN(LXI), USB Host & Device
    • PictBridge support
    • Compact size and light weight
    • Supplied with... USB cable, UK & European mains leads, quick guide,
    • Optional PC software... Ultra Spectrum, S1210 EMI Pre-Compliance Test
    • Other options include... EMI filter & quasi-peak detector, advanced measurement functions, 2FSK measurement & analysis in signal seamless capture mode, USB to GPIB module, rack mount kit, soft carry bag, RF transmitter demo kit, RF receiver demo kit, high power attenuator, RCL standard calibration

    To Rent Rigol DSA710

    In Stock
    • 7.5 GHz Spectrum Analyzer with Built-In Tracking Generator
    • As of 4/1/2017 - Includes Preamplifier OptionPA-DSA875Standard(Previously a $599 add on)
    • 9 kHz to 7.5 GHz Frequency Range (with tracking generator, factory installed)
    • Displayed Average Noise Level (DANL) normalized to 1 Hz ranging from -135 dBm to -161 dBm typical
    • -80 to -98 dBc/Hz at10 kHz offset Phase Noise

    Includes

    • Power Cord
    • Quick Start Guide
    In Stock
    • Supplied with Calibration Kit
    • Supplied with Calibration Certificate
    • Medium-class network analyzer featuring outstanding performance
    • Overrange up to 150 kHz (unspecified and without calibration ex factory)
    • Capable of balanced measurements (mixed-mode S-parameters)
    • Internal step attenuators available as options (up to two attenuators can be installed; for details click link to respective option)
    • Two internal sources (e.g. to provide the RF and LO signals for mixer measurements from a single unit)
    Typically In Stock
    • High-resolution touchscreen
    • Fully customizable display
    • Fast access to important tools
    • Signal details at your fingertip
    • Fast access to instrument setups
    • Documentation at the push of a button
    Call for Availability
Showing 1 - 12 of 20 items