$3,025.00
EMC Test Equipment Categories
EMC Test Equipment Test Equipment
-
-
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
SKU: 10058
Weight: 70 kg (154 pounds)Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobilityFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeInquire for Availability -
Com-Power CDN-M225E Coupling Decoupling Network for Unscreened Power Supply Lines
SKU: sku-54
Weight: 5 lbs. 2.3 kgApplication/Test Type: two conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator
SKU: 10045
Test Standards: IEC/EN 61000-4-8Antennas: Teseq INA 701, 702 or 703Compatible Generators: Teseq NSG 3040 and NSG 3060 -
Teseq MFO 6501 Manual Power Line Frequency Magnetic Field Generator
SKU: 10043
Test Standards: IEC 61000-4-8Antennas: Teseq INA 701, 702 or 703Test Frequency: Selectable 50 Hz and 60 Hz ±3%Magnetic Field Levels: Antenna Dependent$195.00 - $1,095.00Inquire for Availability -
Teseq INA 703 Magnetic Field Coil for NSG 3040 & NSG 3060
SKU: 10042
Test Standards: IEC 61000-4-8# of turns: 1, 5, 37Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cmMounting Base: Rigid aluminum frame with castersRF Connector: 4 pole connector (INA 3250)$129.00 - $495.00Typically In Stock -
PMM 9010
SKU: 11026
Frequency Range: 10 Hz - 30 MHzApplications: Conducted EmissionsTest Standards: CISPR 14, CISPR 16-1-1$495.00 - $5,500.00In Stock -
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%
SKU: HAE-DIP116
Test Standards: IEC 61000-4-11Typically In Stock -
Teseq/Ametek CTS NSG 4070D
SKU: 10549
Standards Met: IEC 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20 Conducted SusceptibilityApplications: Bulk Current Injection Testing, RF Conducted ImmunityInternal Amplifiers: 50 or 100 Watts (or none)System Frequency Range: 4 kHz - 1 GHzInternal Amp Frequencies: 150 kHz to 230 MHz or 4 kHz to 400 MHzTypically In Stock -
HGLP6G Dual Stacked Log Periodic Antenna
SKU: 31099
Frequency Range: 1 GHz – 6 GHzMaw RF Input Power: 350 WattsIsotropic Gain: 9 dBi ± 2.3 dBConnector Type: N (f)VSWR: 2:1 typicalIn Stock -
ESD Test Table
SKU: 11246
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Table Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8m$1,750.00 - $4,950.00Typically Ships in 48-72 Hours -
LPA4G-80M High Power Log Periodic Antenna
SKU: 12445
Weight: 4.6 lb.'s (2.09 kg)Antenna Factor (1 Meter): 5 to 36 db/mApplication/Test Type: RF Radiated Susceptibility Testing, Radiated Emissions TestingDimensions: 56.3" x 72.3" (143cm x 183.6cm)Frequency Range: 80 MHz - 4 GHz$250.00 - $495.00In Stock