EMC/EMI Test & Measurement Equipment - The EMC Shop

EMC Test Equipment Categories

Automotive/Electric Vehicle

Transient Generators

EMI Receivers/EMC Analyzers

RF Power Amplifiers

Electric Field Strength Measurement

RF Conducted Immunity Test Systems

EMC Antennas

Line Impedance Stabilization Networks (LISN's)

EMC Probes

EM Coupling Clamps

Coupling Decoupling Networks (CDN's)

RF Current Probes/Monitors

EMC/EMI Signal Generators

EMC Test Equipment Test Equipment

Com-Power LI-220C 9 kHz - 30 MHz LISN for CISPR 16-1-2/ANSI C63.4

SKU: 10878

Weight: 20.5 lbs / 9.3 kg

Application/Test Type: Power line conducted emissions tests

Current Rating: 20 Amperes AC, 14 Amperes DC

Dimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cm

Frequency Range: 9 KHz - 30 MHz

Cost New:

Was:

Price Now:

$295.00 - $3,965.00

Typically In Stock

ORDERING OPTIONS
Solar 7054-2 EMI Voltage Spike Generator

SKU: 30184

Test Standards: DO-160 SECTION 17, MIL-STD-462

Applications: EMI/EMC For Military Aircraft And Aviation

Spike Amplitude: 10 - 400 Volts

Spike Repetition Rate: 0.8 - 10 Pulses Per Second

Spike Rise Time: 10 microseconds

Cost New:

Was:

Price Now:

$1,750.00 - $1,950.00

IN STOCK

ORDERING OPTIONS
Fischer Custom Communications F-2031-A-DCN-23mm Decoupling Ferrite Tube for IEC 61000-4-6

SKU: sku-727

Weight: 7.5kG

Application/Test Type: ferrite decoupling clamp

Dimensions: Aperture: 23mm Length: 610mm Height: 134mm

Frequency Range: 100kHz - 100MHz

Standards Met: IEC/EN 61000-4-6

VIEW PRODUCT Cart
EM Test Automotive Test System for ISO 7637-2

SKU: 10596

ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

SAE Automotive Standards: SAE J1113, SAE J1455

Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

Micropulse: Micropulse module for test pulses 1, 2A and 6

Inquire for availability

VIEW PRODUCT Cart
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864

SKU: 10546

Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.

Pulse repetition: 1 shot/9 seconds

Pulse voltage (open circuit): 200V - 6.6kV ± 10%

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864

IN STOCK

VIEW PRODUCT Cart
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4

SKU: 10545

Compatible Generators: EFT Generators Electrical Noise/Transient Immunity

Standards Met: IEC/EN 61000-4-4

Cost New:

Was:

Price Now:

$2,990.00

Inquire for Availability
EM Test AutoWave for Generating and Recording Automotive Waveforms

SKU: 21477

Frequency Range: DC - 50 kHz

Sample Rate: 500 kS/s (1 ch)

Output Channels: 2

Output Voltage: 10 V, unipolar or bipolar

Voltage: 10V, unipolar or bipolar

NOT OFTEN

VIEW PRODUCT Cart
ISO 11452-8 Magnetic Field Immunity Test System

SKU: 10463

Frequency Range: 15 Hz to 150 kHz.

Normative References: ISO 11452-1, Road vehicles

Optional: Artificial Networks

Magnetic Field Strengths: up to 1,000 A/m

Inquire for Lead Time

VIEW PRODUCT Cart
ISO 11452-4 Turn Key Solution for Harness Excitation Methods (BCI and TWC)

SKU: 10459

Test Capabilities: RF Conducted Immunity

Standards Met: ISO 11452-4

Applications: Automotive Component Disturbance Testing

BCI Test Levels (w/ built-in amplifier): 1000mA

Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

Typically In Stock

VIEW PRODUCT Cart
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing

SKU: 8250

Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)

Air Discharge Voltage Range: 0.20kV to 30.0kV±5%（30.5kVmax）10.0kV : 0.01kV step 30.0kV : 0.1kV step

Standards Met: IEC 61000-4-2, ISO 10605

Battery: AC100V to AC240V 50Hz／60Hz ±10% 75VA

Contact Discharge Voltage Range: 0.20kV to 30.0kV±5% （30.5kVmax） 10.0kV : 0.01kV step 30.0kV : 0.1kV step

Typically In Stock

VIEW PRODUCT Cart
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

SKU: 11251

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 40Vrms

BCI Test Levels (w/ built-in amplifier): 8Vrms

Typically In Stock

VIEW PRODUCT Cart
PMM 3010 EMC RF Signal Generator, 9 kHz to 1 GHz

SKU: 30169

Frequency Range: 9 kHz to 1 GHz

Frequency Resolution: 1 kHz

Frequency Accuracy: ± 10 ppm @ f > 10 MHz

Level Range: -107 to +10 dBm

Output Impedance: 50 Ω

Typically in Stock

VIEW PRODUCT Cart