Com-Power Categories
Com-Power Test Equipment, Systems & Solutions
-
Com-Power SPA-815TGE 9 kHz to 1.5 GHz Rigol Spectrum Analyzer with Tracking Generator & EMI Option
SKU: sku-1024
-
$49.00
-
Rent Com-Power AH-118 Horn Antenna 700 MHz - 18 GHz
SKU: sku-690
Weight: 3 lbs. [1.4 kg]Antenna Factor (1 Meter): 26.4 to 47.4 (average: 38.9) [dB(m-1)]Antennas: Double Ridge Guide Horn AntennaConnector: Precision N-type (female)Dimensions: 5.6” x 9.5” x 8.1”[14.2 x 24.1 x 20.6 cm]Frequency Range: 1 GHz to 18 GHz (useable from 700 MHz)Gain: 3.6 to 12.6 (average: 9.1) dBiImpedance: 50 OhmsMaximum Continuous Power: 300 WattsVSWR: 1.58 to 3.32 (average: 2.25) :1$319.00 -
Com-Power FCLCE-1000 Current Probe Calibration Fixture
SKU: sku-601
Output resistance: 50 OhmsRF Connector: N-Type -
Com-Power LI-3P-1100 150 kHz - 30 MHz Three-Phase Line Impedance Stabilization Network
SKU: sku-600
Weight: 71.5 lbsApplication/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 100 AmperesFrequency Range: 150 kHz to 30 MHzInductors: 50 µHInsertion loss: less than 0.7 dBIsolation: more than 40 dBMains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power JackRF Connector: RF Measurement Port 50Ω - N-Type (female)Standards Met: ANSI C63.4, CISPR 16-1-2Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V -
-
-
Com-Power LI-220A 9 kHz - 30 MHz LISN for ISPR 16-1-2/ANSI C63.4
SKU: sku-433
Weight: 20.5 lbs / 9.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 20 Amperes AC, 14 Amperes DCDimensions: 16.75 x 15.5 x 7.5 inches / 42.5 x 39.3 x 19 cmFrequency Range: 9 KHz - 30 MHzInductors: 250 & 50 microhenry (air-core)Insertion Loss: 6 dB to 1 dBIsolation: 20 dB to 40 dBMains & EUT Connections: Superior Electric SUPERCON® shrouded socketsRF Connector: 50Ω N-type (female)Standards Met: CISPR 16-1-2 / ANSI C63.4Voltage Rating: 270 VAC (Line to Ground), 380 VDC -
Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz
SKU: sku-432
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: Reference Signal Source for LISN verificationBattery: 6V NiMH, 1 AhDimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cmFrequency Range: 100 kHz to 400 MHz in 100 kHz or 500 kHzMains & EUT Connections: LISN Interface Plug NEMA 15-P typeOperation Time: 18 Hours Typical With Fully Charged Battery -
Com-Power CGC-255E Comb Generator 50 kHz - 400 MHz in 50 kHz/250 kHz steps
SKU: sku-431
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: Reference Signal Source for LISN verificationBattery: 6V NiMH, 1 AhDimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cmFrequency Range: 50 kHz to 400 MHz in 50 kHz or 250 kHz stepsMains & EUT Connections: LISN Interface Plug NEMA 15-P typeOperation Time: 18 Hours Typical With Fully Charged Battery -
Com-Power CGO-51000 Comb Generator 1 GHz - 40 GHz 1 GHz steps
SKU: sku-430
Weight: 2.5 lbs (1.1 kg)AC Power Adapter: 6 VDC 500 mAAntennas: Integral Stub-type (w/protective cover)Application/Test Type: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)Battery: 6V NiMH, 1 AhDimensions: 7 in. x 1 in. (17.8 cm x 2.5 cm)Frequency Range: 1 GHz to 40 GHz in 1 GHz stepsOperation Time: 18 Hours Typical With Fully Charged BatteryPolarity: Vertical, Horizontal -
Com-Power CGO-5100B Comb Generator 1 GHz - 18 GHz 100 MHz step
SKU: sku-429
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500AAntennas: Built inApplication/Test Type: EMI Radiated Site Reference SourceBattery: 3.6 V, NimHDimensions: 8 x 1 inches / 19.2 x 2.4 cmFrequency Range: 1 to 18 GHz in 100 MHz stepsOperation Time: 18 Hours Typical With Fully Charged Battery