Amplifier Research SG6000 Signal Generator 100kHz – 6GHz

Amplifier Research

Write a Review
SKU:
sku-1313
$0.00
$0.00

Description

The Amplifier Research SG6000 is a light weight 2U (3.5”) high signal generator with a frequency bandwidth of 100 kHz to 6 GHz. The signal generator offers a comprehensive modulation capability and offers the convenience of control from the front panel and remote communications using either GPIB or RS-232. The signal generator has rear panel connectors for easy installation into a rack mounted system. The

Specifications
Frequency Range 100 kHz to 6 GHz (Performance below 250 kHz unspecified)
Resolution .0.01 Hz
Phase incrementing 0.01° Nominal
Frequency Bands N is a factor to help define certain specifications in the spec sheet
Band Frequency Range N
1 100 kHz to < 250 MHz 0.5
2 250 MHz to < 375 MHz 0.125
3 375 MHz to < 750 MHz 0.25
4 750 MHz to < 1500 MHz 0.5
5 1500 MHz to < 3000.001 MHz 1
6 3000.001 MHz to 6000 MHz 2
Switching Speed
Type Switching Speed
SCPI mode ≤ 5 ms typical
List/Step sweep mode ≤ 5 ms typical

NOTE: Time of receipt of SCPI command or trigger signal to within 0.1ppm of final frequency or within 100 Hz, whichever is greater, and amplitude settled to within 0.2 dB. Additional time may be required for the amplitude to settle within 0.2 dB when switching to or from frequencies < 500 kHz or amplitudes > +5 dBm.
Accuracy ±aging rate
±temperature effects: ±line voltage effects
Internal Time base Oscillator aging rate ≤ ±5 ppm/10 yrs, < ±1ppm/yr
Temperature effects ±1ppm (0 to 55°C)
Line Voltage effects ±0.1ppm Nominal
Line Voltage range 5% to -10% Nominal
REFERENCE OUTPUT
Frequency 10 MHz
Amplitude ≥+4dBm Nominal (into 50? load)
EXTERNAL REFERENCE INPUT
Input Frequency 10 MHz
Lock Range ±1ppm
Amplitude >-3.5 to 20 dBm Nominal
Impedance 50? Nominal
RF OUTPUT Range (Specifications between 20°C and 30°C)
Frequency Range Output Power
> 250 kHz to 2.5 GHz -110 to +13 dBm
> 2.5 GHz to 3.0 GHz -110 to +10 dBm
> 3.0 GHz to 4.5 GHz -110 to +13 dBm
> 4.5 GHz to 5.8 GHz -110 to +10 dBm
> 5.8 GHz to 6 GHz -110 to +7 dBm

NOTE: Maximum Output Power typically decreases by 0.2 dB/degree C for temperatures outside this range.
Resolution..............................................................0.02 dB Nominal
Step Attenuator ......................................................0 to 130 dB in 5 dB steps
RF OUTPUT CONNECTOR 50? type N connector
VSWR ≤ 1.4 GHz.............................................................1 1.7:1 Typical
> 1.4 GHz to 4 GHz.............................................................1 2.3:1 Typical
> 4.0 GHz to 5 GHz.............................................................1 2.4:1 Typical
> 5 GHz to 6 GHz.............................................................1 2.2:1 Typical
MAXIMUM REVERSE POWER
DC Voltage (max) 50 VDC Nominal
250 kHz to 6 GHz 2 W Nominal
SWITCHING SPEED (Time from receipt of SCPI command or trigger signal to amplitude settled within 0.2 dB when switching to or from amplitudes < +5 dBm)
Type Standard
SCPI mode ≤ 5 ms
List/Step sweep mode ≤ 5 ms
ABSOLUTE LEVEL ACCURACY (between 20°C and 30°C and the ALC on)
Frequency Range Amplitude
+ 7 dBm to -60 dBm < -60 dBm to -110 dBm
250 kHz to 1 MHz ≤0.6 dB ≤0.7 dB
> 1 MHz to 1 GHz ≤0.6 dB ≤0.7 dB
>1 GHz to 3 GHz ≤0.7 dB ≤0.9 dB
>3 GHz to 4 GHz ≤0.8 dB ≤0.9 dB
4 GHz to 6 GHz ≤0.8 dB ≤1.1 dB
ABSOLUTE LEVEL ACCURACY
(For temperatures outside of 20°C and 30°C)
≤ 4.5 GHz............................................................. 0.01 dB/degree C
>4.5 GHz............................................................. 0.02 dB/degree C
FLATNESS CORRECTION Number of Points: 1601
Number of Tables: Dependent on available free memory
SPECTRAL PURITY At Single sideband phase noise (at 20 kHz offset)
500 MHz...................................... ≤-126 dBc/Hz typical
1 GHz.......................................... ≤-121 dBc/Hz typical
2 GHz.......................................... ≤-115 dBc/Hz typical
3 GHz.......................................... ≤-110 dBc/Hz typical
4 GHz.......................................... ≤-109 dB/Hz typical
6 GHz.......................................... ≤-104 dB/Hz typical
HARMONICS
(CW mode, output level <4 dBm)
≤3 GHz .................................................................< -30dBc
>3 GHz ................................................................< -44 dBc typical
NON-HARMONICS (CW mode) > 10 kHz offset 250 kHz to 250 MHz..............................................< -54 dBc
>250 MHz to 375 MHz..........................................< -61 dBc
>375 MHz to 750 MHz..........................................< -55 dBc
>750 MHz to 1.5 GHz...........................................< -48 dBc
>1.5 GHz to 3 GHz...............................................< -48 dBc
>3 GHz to 6 GHz..................................................≤ -42 dBc

Extra Information

Brand:
Amplifier Research