Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

Write a Review
SKU:
sku-260
$995.00
$995.00

Description

Early evaluation of your design's EMI performance is essential for a successful product. The Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality.

Radiated emissions

When combined with a broadband antenna, the Agilent (HP) E7401A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.

Conducted emissions

Test for noise or interference placed on power or data lines by coupling the E7401A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.

Diagnostics and problem isolation

If you have an emissions problem, you can use the Agilent (HP) E7401A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.

Agilent (HP) E7401A Features:

  • Automatic EMI measurements
  • Also compatible with the BenchLink Web Remote software
  • Log sweep
  • 3.5" disk drive
  • 5 minute warm-up
  • Built-in preamplifier
  • Optional tracking generator
  • Rugged, portable design

Extra Information

Applications:
Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC
Pre-programmed Test Limits:
FCC Part 15, CISPR 22, MIL-STD-461
Max Frequency:
26.5 GHz
Min Frequency:
9 kHz
Sweep/Test Speed:
Moderate
Amplitude Accuracy:
0.37 dB
Resolution Bandwidth:
1 Hz to 5 MHz