Teseq NSG 3040 Transient Immunity Test System

Teseq NSG 3040 Transient Immunity Test System

Condition:
Used
Test Capabilities:
Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations
Standards Met:
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29
Applications:
CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
Max EUT Voltage (w/ Built in CDN):
264 Volts
Max EUT Current (w/ Built in CDN):
16 Amps
EFT/Burst Pulse Output Capability:
4.8 kV
Combination/Wave Surge Output Capability:
4.4 kV
Generic Standards:
IEC 61000-6-1, IEC 61000-6-2
Manufacturer:
Teseq

 

No reviews yet Write a Review
$1,495.00
Availability:

In Stock

SKU:
4141-RE

 

 

Getting Started...

Overview

SKU-8174

  • NSG 3040 Generator
  • User Manual
  • 1 Mains Power Cable
  • 1 Dummy Plug (interlock connector)
  • 1 Grounding Strip 10cm
  • 1 EUT Power Input Connector with Cable
  • 1 EUT Power Output Connector
  • Fresh Calibration w/ Data
  • 10% off Calibration Service for Life

The Teseq NSG 3040 multifunction generator for CE mark testing, has the abilites to produce transients for Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT)pulses (4.8 kV) and Power Quality Testing (PQT). Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests.

Evaluate your product for several CE Mark and other certification standards with the multifunction Teseq NSG 3040-IEC Transient Generator with capabilities of Surge Simulatoion per IEC 61000-4-5, Burst/Fast Transient Simulation per IEC 61000-4-4, Dips, interruptions and variations per IEC 61000-4-11 and DC Voltage Variations per IEC 61000-4-29.

The built in CDN will allow for testing on products Single Phase up to 16 Amps. Larger CDN's and accessories are available below, contact The EMC Shop to check for availability and configure your rental transient system.

Standards Met:

Power Line Coupling/Decoupling Networks (Required for NSG 3060)

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Surge Data Line Couplers

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

EFT Couplers

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Waveform Verification and Calibration Equipment

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Surge & EFT Test Setup

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Rent Keysight N9048B CISPR 16 EMI Receiver

Videos

Key Considerations

Manufacturer:
Teseq
Test Capabilities:
Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & Variations
Standards Met:
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29
Applications:
CE Marking, Medical Devices, Industrial Machinery, Electronics & IT
Max EUT Voltage (w/ Built in CDN):
264 Volts
Max EUT Current (w/ Built in CDN):
16 Amps
EFT/Burst Pulse Output Capability:
4.8 kV
Combination/Wave Surge Output Capability:
4.4 kV
Generic Standards:
IEC 61000-6-1, IEC 61000-6-2

Related EMC Equipment & Solutions

Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

Teseq CDN 3083-Surge 620 Volt, 100-200 Amp Manual Coupler

SKU: sku-220

Weight: 80 kg (176 LB's)
Application/Test Type: Manual Surge Testing for EUT up to 100Amps, 620 VAC; Three phase (5 wire); Two phase (4 wire); Single phase (3 wire)
Current Rating: 100 Amp or 200 Amp continous depending on model
Dimensions: 850 x 520 x 345 mm
Mains & EUT Connections: Fischer 105 series; Screw terminals, rated for 230 A
VIEW PRODUCT Cart
Teseq CDN HSS-2 Coupling Decoupling Network for High Speed Communication Lines

Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines

SKU: 6195

Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)
Current Rating: 1 A (rated for Power over Ethernet)
Insertion Loss: 9 dB at 100 MHz
Mains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)
Standards Met: IEC 61000-4-5 Ed. 3
$0.00 - $1,195.00
RENTAL ONLY
ORDERING OPTIONS