IEC/EN Standards Categories
IEC/EN Standards Test Equipment
-
Schaffner CDN 8014 Burst/EFT Coupling Clamp for EN/IEC 61000-4-4
SKU: 10545
Compatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityStandards Met: IEC/EN 61000-4-4$2,990.00Inquire for Availability -
Materials for EFT/Burst Laboratory Test Setup
SKU: 11245
Floor Ground Plate Dimensions: 9" by 6" (Custom sizes available)Standards Met: IEC 60601-1-2, IEC 61000-4-2Applications: Test Setup for Burst/EFT, EMC Precompliance Immunity TestingTable Dimensions: .8 meters (H)Table Top Ground Plane: 1.6m x .8mIN STOCK -
Noiseken ESS-S3011A & GT-30RA Electrostatic Discharge Simulator System for up to 30kV Testing
SKU: 8250
Weight: Approx. 7.0kg (gun holder excluded) Approx. 7.5kg (gun holder included)Air Discharge Voltage Range: 0.20kV to 30.0kV±5%(30.5kVmax)10.0kV : 0.01kV step 30.0kV : 0.1kV stepStandards Met: IEC 61000-4-2, ISO 10605Battery: AC100V to AC240V 50Hz/60Hz ±10% 75VAContact Discharge Voltage Range: 0.20kV to 30.0kV±5% (30.5kVmax) 10.0kV : 0.01kV step 30.0kV : 0.1kV stepTypically In Stock -
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6
SKU: 11251
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 40VrmsBCI Test Levels (w/ built-in amplifier): 8VrmsTypically In Stock -
EMIC-20 EM Injection Clamp for IEC/EN 61000-4-6 Immunity Test
SKU: 7851
Standards: EN/IEC 61000-4-6Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): -.5 dB at 100 kHz to -4 dB at 1 GHz (Min -7 dB at 700 MHzConnector: N-type femaleDimensions: 632 mm x 120 mm x 80 mm$595.00 - $8,500.00Typically In Stock -
Teseq NSG 3040 Transient Immunity Test System
SKU: 4141
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT Voltage (w/ Built in CDN): 264 VoltsMax EUT Current (w/ Built in CDN): 16 Amps$1,495.00 - $17,750.00In Stock -
GTEM 550V Vertical GTEM
SKU: 30081
Max. EUT Size: 35(L) x 40(W) x 27(H) cm / 13 x 15 x 10 inStandards for Emissions Testing: CISPR 14-1, IEC 61000-6-3, and IEC 61000-6-4Standards Met: IEC 61000-4-20Applications: Radiated Immunity, Radiated EmissionsInquire for Lead Time -
Zimmer LMG95 Single Phase Power Analyzer
SKU: 7058
Standards Met: IEC 61000-3-2, IEC 61000-3-3,Additional Standards Met: IEC 61000-3-11, IEC 61000-3-12Measurement Range: 600V (1600 V peak) and 20A (960 A peak for the measurement of inrush currents)Applications: Conducted EmissionsCompliance Accessories: RI2415 Reference Impedance Network$365.00 - $5,650.00Typically In Stock -
Inquire for Availability
-
Schloder CN 1240-125 125A Coupling Network
SKU: 30174
Frequency Range: DC, 15 Hz - 150 kHzInput Voltage: 0 V up to ± 300 VRated Voltage (AE - EUT): 250 V AC/DCRated current (AE - EUT): 125 AConnector: BNCInquire for Availability -
Schaffner NSG 2025-4 EFT / Burst Generator Built in Three Phase Coupler
SKU: 11294
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Burst frequency: 0.1 kHz - 1,000 kHzBurst time: Rise Time: 5ns ±20% (50 W, 10 - 90%) Pulse Width: 50ns ±30% (50 W and 1 W), 100ns ±50% open circuitCoupling: Line to reference ground (IEC 1000-4-4), selected lines together to reference ground, all lines to reference ground (common mode)Mains & EUT Connections: HV Coax (Direct); L, N and PE via Coupler$975.00 - $6,750.00In Stock -
Teseq INA 701 Magnetic Field Coil for IEC 61000-4-8 and IEC 61000-4-9
SKU: 30172
Max. Contin. Frequency Current Supply: 10 AMax. Short Term Frequency Current Supply: 30 A (3 s)Max. Contin. Frequency Field Strength Supply: 330 A/mMax. Short Term Frequency Field Strength Supply: 11100 A/mApplications: Radiated ImmunityInquire for Availability