10 kV Surge Generators

Information

Quick Links

Viewed products

EM Test VCS 500 M10 10kV Combination Wave Surge Immunity Generator View larger

EM Test VCS 500 M10 10kV Combination Wave Surge Immunity Generator

Used

  • Fully IEC 61000-4-5 compliant
  • 1.2/50us - 8/20us; IEC coupling
  • Surge pulses 500 Volts to 10,000 Volts
  • Single phase CNV 501S4 1PH/16A coupler included standard (Inquire for 3 Phase)

More details

Typically In Stock

Request Quote/More Info

Specifications

Supply Voltage 115/230V +10/-15%
Mains & EUT Connections External Coupler Only
Pulse voltage (open circuit) 500V - 10,000V ± 10%
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
Parameter Value
Pulse current (short circuit) max. 5,000A ± 10%
Pulse repetition 1s - 999s, depending on the voltage
Polarity pos / neg / alternate
Phase synchronization asynchronous, synchronous 0 to 359º (in 1º steps)
Test duration 1 - 30,000 or endless
Dimensions 19"/6HU;
Weight approx. 35kg

Test Equipment Description

EM Test VCS 500 M10 - Combination wave simulator for 10kV/5kA

The EM Test VCS 500 M10 combination wave simulator generates surge voltages up to 10kV and surge currents up to 5kVA as it is required for components testing (e.g. overvoltage protection for telecommunication devices). To apply the surge pulse to power supply lines an external single phase coupling/decoupling network comes standard or three-phase can be connected. The coupling modes and the source impedance are set automatically controlled by the VCS 500 M10. Perform pulsed magnetic field testing using IEC 61000-4-9 antenna.

Fail inputs are offered as standard for DUT monitoring purposes. Peak values of voltage and current are shown in the display and these values are transferred to the software for reporting.
Pre-programmed Standard Test routines allow highest user convenience. Still the VCS 500 M10 offers the Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

High Voltage Surge Review:

Surge pulses occur due to direct or indirect lightning strokes to an external (outdoor) circuit. This leads to currents or electromagnetic fields causing high voltage or current transients. Another source for surge pulses are switching transients originating from switching disturbances and systems faults. Due to the characteristic of the phenomenon nearly every electrical and electronical device may suffer from such lightning events which justifies the necessity of surge tests being widely performed. Surge voltage can reach several thousands of volts and surge current is seen to reach several thousands of amps.

EM Test VCS 500 M10 Standards Met:

Associated EMC Test Equipment

3 other products in the same category: