Standards Categories
Standards Test Equipment
-
Chroma 61704 3-Phase AC Power Source for MIL-STD-704 and RTCA DO-160 Testing
SKU: sku-872
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak) -
3ctest APS 40C10 Automotive Battery & Pulse Simulator
SKU: 22867
Output Voltage: -40 to 40 Volts (.2V steps)Output Current: -10 to 10 AmpsProduct Overview (Video): ISO 16750-2 Electrical Load Tests using the APS SeriesFrequency Range: up to 300 kHzBandwidth Response: 100 kHzIN STOCK -
Mil-STD-461 RS103 Electric Field Generator Test Setup
SKU: 12853
Max Field Strength: 500 V/mFrequency Range: (10 kHz) 2 MHz - 100 MHzRF Connectors: 7/16 femaleTest Standards: MIL-STD-461, DO-160Industries: Military and Aviation EMCTypically In Stock -
Ground Reference Plane for EMC/EMI Testing
SKU: sku-833
Material: Aluminum (Copper upon request)Dimensions: 9' by 6'In Stock -
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6
SKU: 10828
Weight: 1.5 kg (3.3 lbs)Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cablesCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 250 mA (CDN ST08 1 Amp)Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)$1,190.00 -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$195.00 - $495.00Typically In Stock -
Keysight/Agilent E4419B EPM Series Dual-Channel Power Meter
SKU: 0807
Weight: 4.1 kg (9.0 lb) netDimensions: 212.6 mm W x 88.5 mm H x 348.3 mm D (8.5 in x 3.5 in x 13.7 in)General Data: Technical DetailsRF Field Probe Frequency Range: 9 kHz to 110 GHzRF Field Probe Power Measurement Range: –70 dBm to +44 dBm (100 pW to 25 W), sensor dependent$250.00 - $1,500.00 -
Schloder M Type CDN's for Disturbance Signals to Unscreened Supply Lines (mains) AC + DC up to 1000V, 100A
SKU: sku-791
Application/Test Type: unscreened supply lines (mains) AC + DCCurrent Rating: 16A / 32A / 63 A / 100 ADimensions: 160 x 84,5 x 240mm or 200 x 122,5 x 400mm depending on modelFrequency Range: 150 kHz to 230 MHzMains & EUT Connections: banana sockets -
3 Phase EFT/Burst, Surge Combination Wave Test System
SKU: 1785
Application/Test Type: CE Marking, EMC Precompliance TestingBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 0.2 – 5.0 kVPulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)Rentals Ship Today -
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV Connector$195.00 - $2,495.00In Stock -
Rohde & Schwarz SMF100A Microwave Signal Generator
SKU: sku-770
Warranty: 120 DaysFrequency Range: 1 GHz to 22 GHzResolution: 0.001 HzRF Connector: R&S®SMF-B81Trigger: auto, external trigger, external gateIn Stock -
Keysight (Agilent/HP) E8247C-520 PSG Signal Generator, 250 kHz to 20 GHz
SKU: sku-769
Weight: 48 lbs.Dimensions: 7” H x 16.8” W x 19.6” DFrequency Range: 250 kHz to 20 GHzResolution: 0.001 HzRF Connector: BNC female