Standards Categories
Standards Test Equipment
-
AH Systems SAS-572 High Gain, Low VSWR Horn Antenna, 18 - 26.5 GHz
SKU: sku-193
Weight: 0.2 lb.'s (0.09 kg)3dB Beamwidth (E-Field): 15°3dB Beamwidth (H-Field): 15°Antenna Factor (1 Meter): 36.7 to 37.1 dB/mAntennas: Double Ridge Guide Horn Antenna -
AH Systems SAS-571 Broadband Double Ridge Horn Antenna
SKU: 4192
Weight: 3.5 lb.'s (1.59 kg)3dB Beamwidth (E-Field): 48°3dB Beamwidth (H-Field): 30°Antenna Factor (1 Meter): 22 to 44 dB/mAntennas: Double Ridge Guide Horn Antenna$249.00 - $395.00Typically In Stock -
Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV
SKU: 10180
Applications: Conducted Immunity Testing, CE Marking, Medical DevicesStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Max EUT AC Voltage (W/ Built In CDN): 264 VoltsMax EUT AC Current (W/ Built In CDN): 16 AmpsEFT/Burst Pulse Output Capability: 5.0 kV$975.00 - $1,795.00Typically In Stock -
Teseq CMAD 20B Common Mode Absorption Device, 1 MHz to 1 GHz, up to 20 mm Cable
SKU: 10141
Weight: approx. 3.4 kgDimensions: (LxWxH): 670 mm x 78 mm x 58 mmFrequency Range: 1 MHz to 1 GHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-20;CISPR 13;CISPR 14-1;CISPR 15;CISPR 16-1-4;CISPR 16-2-3;CISPR 22;CISPR 32;EN 61000-6-3;EN 61000-6-4;IEC 60533$195.00 - $995.00In Stock -
Teseq CVP 2200A Capacitive Voltage Probe
SKU: sku-139
Frequency Range: 150 kHz to 30 MHzRF Connector: BNC 50 Ω, female -
Teseq DPA 3000 Biconical Dipole Antenna 800 to 2800 MHz
SKU: sku-125
Impedance: 50 OhmsWeight: 180 gramsAntenna Factor (1 Meter): 30 dB/m to 38 dB/m (0.8 GHz to 2.5 GHz)Antennas: Dipole AntennasConnector: N female -
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6
SKU: sku-122
Weight: approx. 5.5 kgDimensions: 670 mm x 100 mm x 79 mmFrequency Range: 150 kHz to 1000 MHzMax. Cable Diameter: 20 mmStandards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326 -
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6
SKU: sku-119
Weight: approx. 7 kgApplication/Test Type: Injects the disturbance signal through a combination of inductive and capacitive couplingClamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)Connector: N-type femaleDimensions: 647 mm x 130 mm x 105 mm -
Teseq INA 6501 Manual Step Transformer for AC Dips & Interruptions
SKU: sku-116
Accuracy: ±5%Input voltage UIN: 0 to 250 VAC, 50/60 HzOutput voltage UVAR: 4 steps: 0% - 40% - 70% - 80% of UINVoltage change with load: 00% output, 0 to 16 A less than 5%; 80% output, 0 to 20 A less than 5%; 70% output, 0 to 23 A less than 5%; 40% output, 0 to 40 A less than 5%$2,060.00 -
Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network
SKU: sku-90
Weight: 5 lbs. 2.3 kgApplication/Test Type: Four conductor power cableCommon Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60ΩCurrent Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE) -
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
SKU: sku-86
Weight: 700 grams (1.5 LB.'s)Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.Common Mode Impedance: 150 Ω +10/-20 ΩCurrent Rating: 10 Amps MaximumDecoupling of Common Mode Disturbance: Greater than 30 dB -
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2
SKU: 10058
Weight: 70 kg (154 pounds)Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobilityFrequency Range: 9 kHz to 30 MHzInductors: 50 Ω // [5 Ω + 50 µH] with 250 µH chokeInquire for Availability