Standards Categories
Standards Test Equipment
-
LDPS AC Power Source, 1 kW up 4.4 Amps
SKU: 8549
Current ranges: ±24mA to ±400A pk in fifteen rangesSampling rate: 300 samples per secondStandards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3Additional Standards Met: IEC 61000-4-7 , IEC/EN61000-4-15Voltages Ranges: 115V (±200V pk), 230V (±400V pk)IN STOCK -
SS18G-100 6 GHz - 18 GHz Solid State RF Amplifier for 200 V/m
SKU: 11960
Weight: 35 kg (77.15 lbs)Dimensions: 430 x 222 x 560 mmFrequency range: 6 - 18 GHzGain: 50 dBRated Power: 100 watts1 LEFT -
EM Test VDS 200N30 Voltage Drop Simulator
SKU: 15954
Output voltage: 0V - 60VOutput current: 0A - 30A, continuousPeak current: 70A for max. 500msFrequency range: DC to 100 kHzSupply voltage: 230V (US-type 208V)Rental Only -
3ctest TAN 8124 Artificial Network
SKU: 30134
Frequency Range: 0.1 - 110 (150) MHzMax. Continuous Current: 70 AMax. Current (Short Time): 100 AMax. Voltage (DC): 500 VMax. Voltage (AC 50/60 Hz): 250 VInquire for Lead Time -
Amplifier Research 150W1000 RF Amplifier 80-1000 MHz, 150 Watts
SKU: 3726
Max Frequency: 1 GHzMin Frequency: 80 MHzOutput Power: 150 WattsApplications: Radiated Immunity, Automotive, Medical, Military and AerospaceStandards: IEC 61000-4-3, ISO 11451-2, MIL-STD-461, DO-160In Stock -
Schwarzbeck NTFM 8131 2-Wire Impedance Stabilisation Network, 9 kHz - 30 MHz
SKU: 11141
Test Standards: CISPR 32, CISPR 15/EN 55015Max Voltage: 400 Volts ACMax Current: 3 AmpsImpedance: 150 Ω ±20 ΩEUT/AE Connections: 4 mm jacksInquire for Availability -
Com-Power LI-325C Line Impedance Stabilization Network
SKU: 10891
Application/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7.5 x 8 inches / 33 x 19 x 20 cmFrequency Range: 10 kHz to 400 MHzInductors: 5 µH (air-core)Inquire for Availability -
TDK EFG-03 High Power E-Field Generator 10 kHz - 100 MHz, up to 500 V/m
SKU: 9091
Weight: 68 kg (150 lbs.)Connector type: 7/16 femaleTest Standards: MIL-STD-461 RS103, DO-160Applications: Radiated SusceptibilityBuilt in Load: YesTypically In Stock -
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$1,690.00 - $2,290.00Typically In Stock -
Teseq CIP 9136A Bulk Current Injection Test Clamp
SKU: 8766
Aperture: 43 mm (1.7 inches) inside; 113 mm (4.44 inches) outsideConnector: N-Type up to 1,000 WattsDimensions: 61 mm wide (2.4 inches)Frequency Range: 4 kHz - 400 MHzImpedance: 100 Ω typical at resonance$440.00Typically in Stock -
3ctest EFT 500S Burst/EFT Simulator up to 4.8 kV w/ Single Phase CDN
SKU: 11521
Standards Met: IEC/EN 61000-4-4, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2Applications: EFT Immunity, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 264VoltsMax EUT AC Current (w/ Built in CDN): 16 AmpsMax EUT DC Voltage (w/ Built in CDN): 125 Volts6-8 Weeks -
Solar 2654-2 Lightning Transient Generator for DO-160 Section 22
SKU: 10504
Applications: Military & Aerospace EMCCapabilities: DO-160 Section 22 Level III, Single & Multiple Stroke, Multiple BurstTest Capabilities: Level IIITypically In Stock