Compliance Standards

Quick Links


Compliance Standards There are 116 products.


  • International (IEC/EN)

    The EMC Shop stocks IEC test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.


    Application Support, Pricing, Lead Time & More: Contact Form        Rent IEC Test Equipment

  • Product Standards

    Industry specific products include electrical equipment for medical devices, automotive and transportation, and basic consumer products. The EMC Shop will help pinpoint the required test equipment for certifying or evaluating your product in order to obatin certification.

  • Military & Aerospace Standards
    These standards establishes interface and associated verification requirements for the control of the electromagnetic interference (EMI) emission and susceptibility characteristics of electronic, electrical, and electromechanical equipment and subsystems designed or procured for use by activities and agencies of the Department of Defense (DoD).
  • Automotive EMC Standards

    With the rise of electrical vehicles, more emphasis is given to test standards to ensure safety and functionality from component, sub assembly and complete hevicle level. The EMC shop is supplying automotive EMC test equipment for international compliance standards such as ISO 7637 and ISO 16750-2, as well as for manufacturer specific test standards. Most test standards revolve around the conducted immunity for electrical disturbances, but also include applications for wireless RF immunity and emissions.Diagram - Typical Pulse Genrator in Automotive EMC Test Standards

    Automotive EMC Test Equipment

    RF Conducted Immunity - Bulk Current Injection (BCI) Method

    Radiated Immunity Using a Stripline

    Magnetic Immunity using Helmholtz Coil

    Immunity to Electrical Fast Transients

    Electrostatic Discharge Immunity

    CISPR 25 Radiated Emissions

    Get Application Support, Pricing, Lead Time and More: CONTACT FORM

  • CISPR Standards

    CISPR Standards set for controlling electromagnetic interference in electrical and electronic devices, and is a part of the International Electrotechnical Commission (IEC).

  • Telecom Testing

    Telecom Testing EMC requirements for information technology & telecommunication equipment.

    The EMC Shop stocks electromagnetic environmental equipment for classes of telecommunication equipment covering all relevant electromagnetic environmental parameters. This Recommendation applies to telecommunication equipment installed in telecommunication centres, outdoor locations and customer premises. This is a basic EMC Recommendation for telecommunications.

  • ANSI/IEEE Standards

    The American National Standards Institute (ANSI) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States.

    IEEE is an organization composed of engineers, scientists, and students. The IEEE is best known for developing standards for the computer and electronics industry.

  • FCC Part 15

    FCC Part 15 regulates low power, unlicensed devices that could cause interference to the Amateur Radio Service and vice versa.

    FCC Part 15 covers an assortment of electronic equipment that generates RF energy whether it's intentional, unintentional or incidental. Amateurs will need to consider Part 15 as it relates to digital devices, computers, low-powered, unlicensed transmitters, electrical devices and any other "generic" device that might generate RF in the normal course of its operation.

    Rent, buy, or lease FCC Part 15 test equipment for radiated and conducted emissions measurements. The EMC Shop stocks calibrated equipment.

  • FCC Part 30

    The EMC Shop stocks test equipment solutions to support FCC Part 30 millimeter wave radiated emissions testing, compliance and precompliance.

per page
Showing 1 - 12 of 116 items
    • Class A-linear design
    • Meets Standard IEC 61000-4-3, ISO 11452 & more
    • Compact and Robust System
    • Reduced Thermal Radiation
    In Stock
    Request Quote/More Info
    • High Power
    • Class A-linear design
    • Meets Standard MIL-STD(s)
    • Compact and Robust System
    • meets IEC 61000-4-3ISO 11452, and many other standards

    In Stock
    Request Quote/More Info
    • 1 meter induction coil
    • For continuous magnetic fileds
    • Up to 360 A/m
    In Stock
    Request Quote/More Info
    • Frequency Range: 9 kHz - 500 MHz
    • For use with BCIP400M BCI Probe or similar
    • ISO 11452-4 
    • IEC 61000-4-6
    • Suitable for probes with diameter of 3.2 to 4.4 cm (1.25 to 1.73 inches)

    Typically In Stock
    Request Quote/More Info
    • ISO 16750-2 TEST A/B
    • ISO 7637-2 P5a/P5b
    • Generates clipped load dump pulse 
    • internal adjustable source impedance 
    • Pulse duration up to 1200ms (internal resistance more than 2 Ω)
    • Comply with most international standards and car manufacturer standards 
    • Built-in 60V/30A coupler 
    • With the function of current detection and over current protection 
    • Ethernet, RJ 45, PC control

    Typically In Stock
    Request Quote/More Info
    • Frequency Range: 290 MHz- 7 GHz
    • Compact & Lightweight
    • Input Power (CW): 1000 Watts
    • Gain: 5.8 dBi
    • Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
    Typically In Stock
    Request Quote/More Info
    • New Units Ship Immediately
    • 2 Year Warranty
    • 10% off Calibration Service for Life
    • Ideal EN/IEC 61000-4-5
    • 32 memory locations for custom test sequences
    • Built-in 16 Amp Coupling Network AC or DC up to 270V
    • Remote Control Software via USB or Fiber Optic
    • Configurable with EFT4-4 and PQF4-11
    • Integrated 1PH/3-wire CDN
    • Color Touch Screen Interface
    Typically In Stock
    Request Quote/More Info
  • Typically In Stock
    Request Quote/More Info
    • Compact & Lightweight
    • Input Power (CW): 1000 Watts
    • Gain: 6.5 dBi
    • 3 Year Warranty
    • Calibration includes 3m Antenna Factors, Gain & VSWR (Additional Measurements Available Upon Request)
    Typically In Stock
    Request Quote/More Info
  • Request Quote/More Info
    • AC (V): 600
    • DC (V): 1000
    • CDN M-Type
    • Coupling / Decoupling of disturbing signal to unscreened supply lines (mains) AC + DC
    • 150 kHz – 80 MHz
    • Suitable for IEC 61000-4-6
    Typically In Stock
    Request Quote/More Info
    • Our standard PIM #X modules cover the most common surge standards, such as EN, ETSI, IEC, Telcordia (Bellcore),FCC (TIA) 68, UL, ITU, ANSI, IEEE & more.
    • Any customized waveform can be easily realized and integrated in a new or existing PSURGE 8000 system.
    • Various coupling / decoupling networks for power lines 1-phase and 3-phase up to 690 V / 100 A are available.
    • A selection of coupling networks for data & signal lines up to 24 outputs are on-hand.
    • Test routine storage and recall, up to 36 tests & programs.
    • WinFEAT’R is a drag & drop control, measuring and reporting software for your full automated test procedure and test report.
    • WinFEAT’R is fully compatible with Windows XP/Vista/7
    In Stock
    Request Quote/More Info
Showing 1 - 12 of 116 items