Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Artificial Mains Networks (AMN's)
Artificial Mains Networks (AMN's)
Rent or Buy Artificial Mains Networks per CISPR 25.
The AN shall have a nominal 5 mH inductance and shall meet the impedance characteristics shown in figure 3 with a tolerance of ±10 %. A suggested schematic is shown in annex F. The measuring port of all ANs shall be terminated with a 50 W load (either a measuring instrument or a resistor). For the purpose of this standard, the AN may be used from 0.1 to 108 MHz.
Artificial Mains Networks (AMN's) There are 14 products.
LISN-CISPR25 Single Path Automotive Line Impedance Stabilization Network
- Current Handling: 200 Amps (Custom Models Available up to 1,000 Amps)
- Inductance: 5 μH
- Frequency Range: 100 kHz - 108 MHz
- Termination: Threaded Stud (TS)
- RF Connector: N-Type
- Typical Configuration in Stock: LISN-CISPR25-200A-TS-N
- 4 Year Warranty
$2,399.00In StockSchwarzbeck NNHV 8123-800 Single Path High Voltage AMN (LISN)
In Stock- High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
- To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
- Can be used for BCI with an external dummy load.
- Impedance (5µH) || 50 Ohm
- 800 A
- 1000 V (DC)
- Backside with built in 0.1 microfarad capacitor to ground
- N-jack
- Normally used in pairs inside the enclosure HVSE 8601!
Com-Power LI-3100 Line Impedance Stabilization Network
Typically in Stock- 10 kHz to 400 MHz Frequency Range
- Price is for a pair of LI-3100 line impedance stabilization networks
- Frequency range of 10 kHz to 400 MHz
- Fully compliant with DO-160/ MIL-STD 461F/CISPR 25/ CISPR 16-1-2
- 100 Amp AC (forced air cooling)
- “Air-core” inductors to prevent saturation
- Individual Calibration Included
- Three-Year Warranty
Com-Power LI-550C 100 kHz to 108 MHz Line Impedance Stabilization Network
Typically In Stock- 100 kHz to 108 MHz Frequency Range
- Fully compliant with CISPR 25 / CISPR 16-1-2
- "Air-core" inductors to prevent saturation
- Individual Calibration Included
- Three-Year Warranty
Schwarzbeck NNHV 8123 Single Path High Voltage AMN (LISN)
In Stock- High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
- To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
- Can be used for BCI with an external dummy load
- Impedance (5µH) || 50 Ohm
- 70 (100) A
- 1000 V (DC)
- Backside with built in 0.1 microfarad capacitor to ground
- N-jack
- Normally used in pairs inside the enclosure HVSE 8600!
Schwarzbeck NNHV 8123-200 Single Path High Voltage AMN (LISN)
In Stock- High Voltage LISN acc. to CISPR 25 Ed. 4 or BMW GS 95025-1
- To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV),
- Can be used for BCI with an external dummy load.
- Impedance (5µH) || 50 Ohm
- 200 A
- 1000 V DC
- Backside with built in 0.1 microfarad capacitor to ground
- N-jack
- Normally used in pairs inside the enclosure HVSE 8600!
EM Test AN 200N100 Single line Artificial Network as per ISO 7637-2, CISPR25, ISO 11452 and CISPR16, switchable, 100A
In Stock- Artificial Network as per ISO 7637 or CISPR 25/ ISO 11452-4
- Frequency range: 100kHz - 108MHz
- DC voltage max. 400V
- AC voltage max. 250V (up to 1kHz)
- Current max. 50A AC/DC cont.
- Insertion loss < 3dB
- Compact design
Schwarzbeck NNHV 8123-400 Single Path High Voltage AMN (LISN)
In Stock- High Voltage LISN according to to CISPR 25 Ed. 4 or BMW GS 95025-1
- To measure the conducted disturbance voltage on shielded lines for (hybrid) electric vehicles (HEV, EV), can be used for BCI with an external dummy load.
- Impedance (5µH) || 50 Ohm
- 400 A
- 1000 V (DC)
- Backside with built in 0.1 microfarad capacitor to ground
- N-jack
- Normally used in pairs inside the enclosure HVSE 8600!
Schwarzbeck NNBM 8126-A 890 Single Path Airborne Equipment LISN
In Stock- LISN 5 µH || 50 Ohm
- 70 (100) single path
- Suitable for 600V DC and 270 V AC 890 Hz
- Calibrated up to 400 MHz according to DO-160
Schwarzbeck NNBM 8124-400 Single Path Vehicle AMN (LISN)
In Stock- Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
- Impedance (5µH + 1 Ohm) || 50 Ohm
- Max. 400 A. With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
- BNC female connector
Option N connector:
- N-female connector instead of BNC
Schwarzbeck NNBM 8124-200 Single Path Vehicle AMN (LISN)
In Stock- Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
- Impedance (5µH + 1 Ohm) || 50 Ohm
- Max.200 A
- With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side, single path
- BNC female connector
Option N connector:
- N-female connector instead of BNC
Schwarzbeck NNBM 8124 Single Path Vehicle AMN (LISN)
In Stock- Automotive LISN acc. CISPR 25 and ISO 7637-2 and for BCI-Testing
- Impedance (5µH + 1 Ohm) || 50 Ohm
- Max. 70 (100) A
- With switchable 50 Ohm load and switchable 1 mikrofarad capacitor at mains side single path
- BNC female connector
Option N connector:
- N-female connector instead of BNC
