Send Enquiry For CG11G Comb Generator 10 Mhz to 11 GHz
CG11G Comb Generator 10 Mhz to 11 GHz
- Compact Design for Easy Use
- Frequency Switch
- Battery Powered for 40 Hours Fully Charged
- Rugged Housing made of Aircraft Grade Aluminum Alloy
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 + Shipping Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total + Shipping
Compliant EMI Test Receivers
Compliant EMI Test Receivers
EMC/EMI signal analyzers will allow you to perform pre-compliance measurements and diagnostic evaluation of your products so you can find and fix problems before they enter the test chamber for certification.
The EMC Shop carries compliant EMI test receivers to conduct full standards-compliant testing in accordance with standards such as:
- CISPR
- EN/IEC
- FCC
- ANSI
- MIL STD
- DO-160 and more
In stock fully compliant EMI test receivers for ideal EMI certification measurements as required in a variety of applications.
Get Application Support, Pricing, Lead Time and More: Contact Form
Compliant EMI Test Receivers There are 12 products.
Showing 1 - 12 of 12 items
CG11G Comb Generator 10 Mhz to 11 GHz
In Stock- Compact Design for Easy Use
- Frequency Switch
- Battery Powered for 40 Hours Fully Charged
- Rugged Housing made of Aircraft Grade Aluminum Alloy
Keysight (Agilent) N9030A PXA Signal Analyzer, 3 Hz to 50 GHz
In Stock- Extend frequency up to 110 GHz with Keysight smart mixers
- Capture transient signals with real-time spectrum analysis
- Perform deeper troubleshooting with the 89600 VSA software
- Simplify testing of phase noise, noise figure, LTE-Advanced, WLAN
Rent Keysight N9048B CISPR 16 EMI Receiver
Call for Availability- Rentals ship immediately
- 1 Hz - 26.5 GHz
- Real-Time Analysis up to 40 MHz
- Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
- Meets CISPR 16-1-1: 2010 and MIL-STD-461G EMI receiver requirements
- Purchase a Used Keysight N9038A EMI Receiver here.
PMM 9010 EMC/EMI Digital Receiver per CISPR 16-1-1
In Stock- Available for Rental or Purchase
- Hardware and Firmware designed around the current EMC standards ready to upgrade to future changes
- Powerful digital Click Analyzer with full compliance to latest CISPR 14-1 specifications, 1 (internal option) or 4 (external option) channels
- Frequency ranges: 10Hz to 30MHz; 3GHz; 6GHz; 18GHz
Rent Keysight (Agilent) N9038A-526-B85-RT1 EMI CISPR Compliant Test Receiver
Call for Availability- Rentals ship immediately
- 85 MHz Bandwidth Analysis Option (Fastest Testing Possible)
- Real-Time Analysis up to 85 MHz BW
- Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
- Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
- Purchase a Used Keysight N9038 EMI Analyzer here.
Keysight (Agilent) N9010A EXA Signal Analyzer, 9 kHz - 3.6 GHz
- ISO 17025 Calibration from Keysight
- 25 MHz Bandwidth
- -170 dBm DANL at 1 GHz
- Max Dynamic Range 3rd order @ 1 GHz: 112 dB
- Standard Attenuator Range; 60 dB (10 dB Steps)
- Measure the smallest signals in the presence of large ones with best-in-class level accuracy, DANL & TOI
- Perform power measurements quickly at discrete frequency points with list-sweep mode
- Simplify testing with X-Series measurement apps: phase noise, noise figure, analog demodulation, wireless communications & more
$14,012.50 $14,750.00 -5%Reduced price!1 UnitKeysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz
In Stock- Rent the Keysight (Agilent) N9038A-526-B85-RT1
- 3 dB resolution bandwidths
- Quasi-peak, EMI-avg, RMS-avg and diagnostic detectors
- Meets CISPR 16-1-1: 2010 and MIL-STD-461F EMI receiver requirements
- ±0.5 dB absolute amplitude accuracy
- -166 dBm displayed average noise level (DANL) with preamplifier and noise floor extension
- EMC measurements offering simultaneous detectors, signal lists, scan tables, limit lines, and correction factors
PMM 9010F CISPR 16-1-1 and MIL-STD-461 Compliant EMC/EMI Receiver
In Stock- Frequency range: 10 Hz – 30 MHz, expandable to 3/6/18 GHz by the external modules 9030, 9060, 9180
- Very low noise floor: < -24 dBµV in band A, < -7 dBµV in band B
- Multi-band preselector
- All CISPR detectors, simultaneous
Rohde & Schwarz ESW Series EMI Test Receiver for CISPR16-1-1, 2 Hz to 8 GHz
Typically In Stock- Frequency ranges:
- 2 Hz to 8 GHz ESW8
- 2 Hz to 26.5 GHz ESW26
- 2 Hz to 44 GHz ESW44
- Compliant with CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC
- Highest dynamic range and highest accuracy for demanding certification measurement
- Ultrafast measurements with FFT-based time domain scan
- EMI test receiver and signal and spectrum analyzer in a single box
- Frequency ranges:
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
In Stock- Rentals ship immediately
- Monthly Rate Price
- Current ISO 17025 Calibration Provided
- Meets CISPR 16-1-1: 2010 and MIL-STD-461
- Frequency Range: 20 Hz - 40 GHz
- Configuration Includes:
- B10: External Generator Control via GPIB
- B18: Removable Hard Disk
PMM-9030 9010 3GHz Extension Unit
In StockThe PMM 9030 is an ultra-fast EMI receiver head that extends the measurement range of the PMM 9010 EMI receiver to cover 30MHz to 3GHz for Radiated Emissions testing as a full-compliance EMI receiver. It is the only fully-compliant EMI receiver directly connectable to an antenna.
PMM-9060 EMC/EMI Digital Receiver
In StockPMM 9060 Extension unit to 9010 to increase frequency range to 6GHz, fully CISPR 16-1-1 compliant. Fiber optic link to 9010 receiver, includes 20m cable and antenna adapter. Rechargeable Li-Ion battery with AC charger/adapter. RS-232 interface for service.
Showing 1 - 12 of 12 items