Voltage Dips and Interruptions Testers

Rent or buy used Voltage Dips and Interruptions Testers. The EMC Shop specializes in power quality test and compliance, stocking generators for conducted immunity testing.

Power quality testing and compliance is a key element to for complying to CE, IEC, Mil-STD, DO-160 and more. AC and DC power dips, drops, fails and interruptions are accomplished using fast switching power sources with unique sustainability and preprogrammed waveforms and test routines.

Voltage Dips and Interruptions Testers There are 40 products.

per page
Showing 1 - 12 of 40 items
    • Up to 300VDC EUT max. Voltage
    • 5.7 inch color touch screen
    • Full compliant test as per IEC 61000-4-11 
    • Built-in multi functional test module 
    • Data acquisition of voltage and current 
    • Programmable test procedures 
    • Ethernet RJ45, PC remote control, test report documentation and print
    Request Quote/More Info
    • 7" / 800 x 480 / 24 bit touch-screen
    • Reduction of daily working effort due to easy access menu structure
    • Intuitive menu prompting
    • Multilingual menus (English, German, French)
    • Ethernet and USB connectivity
    • Touch screen interface (via AXOS)
    • Automatically controlled Voltage Dips for 0/40/70/80[%] (via AXOS)
    • LED Light indicator for active Voltage Dips percent


    • Test Certificate
    • Blue bonding cable 0.25m
    • Black bonding cable 0.25m
    • Yellow/Green bonding cable 0.25m
    • Purple bonding cable 0.25m
    • Earth bonding cable 1m
    • D-sub 37p cable 1m
    Request Quote/More Info
    • Compact and complete test system
    • Predefined Tests and Programs
    • Testing according to IEC/EN 61000-4-11
    • Selectable current limit to protect EUT
    • Automatic Test Report generation
    • Flexible to meet individual needs
    • Remote control via RS-232
    • Centronics printer interface
    • Fully automatic testing of complex test routines
    Request Quote/More Info
  • Request Quote/More Info
    • Standalone test equipment used for voltage dip and short interruption test
    • Rising/fall time < 1 us
    • With electronic short circuit protection function
    • Rated voltage 60V DC
    • 5.7 inch color touch screen operation on front panel
    • Standard test program
    • Ethernet interface
    Request Quote/More Info
    • IEC/EN 61000-4-5 & ANSI C62.45: SurgeModule up to 5kV
    • IEC/EN 61000-4-4: Burst Module up to 5.5kV
    • IEC/EN 61000-4-11: Dips Interrupts and Variations
    • Built in Single phase 300 Volt/16 Amp coupler
    • Manual operation from front panel
    • USB and GPIB-Bus for remote control
    • Monitor outputs for peak voltage and peak current
    • Fail inputs
    • External variac control 0-10Vdc
    Request Quote/More Info
  • Request Quote/More Info
    • Rentals Ship Immediately
    • Perform Precompliance To:
    • Monitor surge voltage and current at the output terminals 
    • Creates custom test protocols
    • Built in 1 Phase Coupler, 50-277 VAC, 16 Amps (100 VDC,10A) Maximum
    • Still serviced by The EMC Shop
    Request Quote/More Info
    • Voltage up to 60 V, 2 ranges
    • Expandable to 77 V
    • Current up to 100 A (300 A peak)
    • Four quadrant operation
    • Fast step response time
    • Low output impedance
    • High Bandwidth
    • Temperature-controlled air cooling
    • Pre-programmed test routines to simulate various supply waveforms
    • Input for external signal generator to produce most complex waveforms
    • Software for Windows Vista & Windows 7

    Request Quote/More Info
    • Integrated function unit to NSG 3040
    • Power line dips to 0%, 40%, 70% and 80%
    • Complies with IEC/EN 61000-4-11
    • Sturdy design with industrial connectors
    Request Quote/More Info
    • Rent the Teseq NSG 3040-IEC System
    • Includes PQM 3403 module to perform interrupt tests
    • Fully IEC 61000-4-2, -4, -5 compliant
    • Fully IEC 61000-4-11 & -4-29 compliant
    • 16 A single phase CDN
    • Multi-function generator for immunity testing in compliance with EN/IEC 61000-4-4,5,11,29 for single phase testing up to 270 V/16 A.
    • Up to 4.4kV Surge and 4.8kV EFT/Burst testing
    Request Quote/More Info
    • For use with 3ctest CCS line simulators to complete Power fail test as per IEC 61000-4-11
    • When used with 3ctest TCXS111 single turn magnetic coil, IEC/EN 61000-4-8 can be tested as well
    • Electromagnetic relay protection if voltage or current more than rated value
    • Protection function for over temperature
    • CN25 bus for connection
    Request Quote/More Info
Showing 1 - 12 of 40 items