SAE J-1113

 

EMC/EMI Testing Services              Automotive EMI/EMC Testing              ISO 16750-2 Load Dump Generators

 

SAE J-1113 Surface Vehicle Standard for “ELECTROMAGNETIC COMPATABILITY MEASUREMENT PROCEEDURES AND LIMITS FOR VEHICLE COMPONENTS (EXCEPT AIRCRAFT) (60 HZ TO 18 GHZ)". The EMC Shop specializes in electromagnetic compatibility measurement and testing on vehicle components. Rent, buy or lease test equipment for SAE J-1113 sections below.

 

Get Application Support, Pricing, Lead Time and More: 

 

EMC/EMI Testing Services              Automotive EMI/EMC Testing              ISO 16750-2 Load Dump Generators

 

SAE J-1113 Surface Vehicle Standard for “ELECTROMAGNETIC COMPATABILITY MEASUREMENT PROCEEDURES AND LIMITS FOR VEHICLE COMPONENTS (EXCEPT AIRCRAFT) (60 HZ TO 18 GHZ)". The EMC Shop specializes in electromagnetic compatibility measurement and testing on vehicle components. Rent, buy or lease test equipment for SAE J-1113 sections below.

 

Get Application Support, Pricing, Lead Time and More: CONTACT FORM

 

SAE J-1113 Active Parts:

J-1113-1: General description and Definitions.

J-1113-4 Conducted Immunity- Bulk Current Injection (BCI) Method

J-1113-11: Immunity to Conducted Transients on Power Leads

J-1113-12: Electrical Interference by Conduction and Coupling- Coupling Clamp

J-1113-13: Immunity to Electrostatic Discharge

J-1113-21: Road Vehicles- Electrical Disturbances by Narrowband Radiated Electromagnetric Energy Component Test Methods – Absorber Lined Chamber

SAE J-1113 Withdrawn Parts:

J-1113-2: Conducted Immunity, 30 Hz to 250 kHz, Power Leads.

J-1113-3: Conducted Immunity, 250 kHz to 500 MHz, Direct Radio Frequency (RF) Power Injection.

J-1113-22: Immunity to Radiated Magnetic Fields from Power Lines

J-1113-23: Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method

J-1113-24: Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, TEM Cell Method

J-1113-25: Immunity to Radiated Electromagnetic Fields, 10 kHz to 500 MHz, Tri-plate Line Method

J-1113-26: Immunity to AC Power Line Electric Fields

J-1113-27: Immunity to Radiated Electromagnetic Fields Reverberation Chamber Method

J-1113-28: Immunity to Radiated Electromagnetic Fields - Reverberation Method (Mode Tuning)

J-1113-41: Test Limits and methods of Measurement of Radio Disturbance Characteristics from Vehicle Components and Modules, Narrowband, 150 kHz to 1000 MHz

J-1113-42: Conducted Transient Emissions

More

SAE J-1113 There are 7 products.

Showing 1 - 7 of 7 items
    • Most compact equipment for ripple noise on ac/dc supplies and magnetic fields
    • Built-in LF signal generator
    • Built-in LF amplifier
    • Built-in LF transformer 2:
    • Built-in frequency-selective voltage and current meter
    • Built-in load resistors
    • Automatic self-calibration
    • Frequency Range: 10 Hz - 250 kHz
    Request Quote/More Info
    • Magnetic field tests and measurement DC to 250 kHz
    • Complies to all relevant EMC, Automotive and Military Standards
    • Magnetic field strength up to 1000 A/m at 1000 Hz
    • Fully automated tests with triaxial Helmholtz coil
    • Wide choice of accessories
    Request Quote/More Info
    • One-box transformer and 0.5 ohm load assembly
    • Frequency response 10 Hz to 250 kHz
    • Secondary saturation 50 A per transformer
    • Audio power 2 x 200 W
    • Freely configurable on primary/secondary; serial, parallel, single
    • Turns ratio 2:1 step down
    • Built-in non-inductive load resistor 0.5 ohm, 250 W
    Request Quote/More Info
    • Signal generator and integrated power amplifier 15 Hz to 150 kHz
    • Meets IEC / EN 61000-4-16 in combination with NSG 4060-1
    • Meets IEC / EN 61000-4-19 in combination with CDND M316-2 for voltage and CT 419-5 for current testing
    • Prepared test configurations for IEC / EN 61000-4-16 and IEC / EN 61000-4-19
    • 5.7” color display 
    • Multiple EUT monitoring options
    Request Quote/More Info
    • ISO 16750-2 TEST A/B
    • ISO 7637-2 P5a/P5b
    • Generates clipped load dump pulse 
    • internal adjustable source impedance 
    • Pulse duration up to 1200ms (internal resistance more than 2 Ω)
    • Comply with most international standards and car manufacturer standards 
    • Built-in 60V/30A coupler 
    • With the function of current detection and over current protection 
    • Ethernet, RJ 45, PC control

    Request Quote/More Info
    • Compliance 5 RF Emissions & Immunity Software:
      • Commercial
      • Military
      • Aerospace
      • Automotive
      • Reverberation Chamber
    • Create Test Reports
    • Over 350 Instruments Supported
    • Modify test procedures, test set-ups and EUT test sequences

    Request Quote/More Info
    • 4-Quadrant – Can source and sink current
    • ±80V – DC supply for 12V to 48V systems; meets 80V surge requirements
    • 300 kHz Sine – DC ripple tests for all major standards
    • 3µS Rise Time – Exceeds surge and dropout slew rate requirements
    • 3mΩ DC Source Impedance – Out-performs ISO 7637-2 requirements
    Request Quote/More Info
Showing 1 - 7 of 7 items