Telecom Testing Categories
Telecom Testing Test Equipment, Systems & Solutions
-
3ctest CWS 600 6kV Surge Simulator for IEC 61000-4-5
SKU: 11331
New Systems: Inquire to purchase a new unitStandards Met: UL 1449, IEC/EN 61000-4-5, IEC/ISO 60601-1-2Coupling: Single Phase Built in, 16A, 250VAC, 120VDCApplications: EMC Surge, CE MarkingMains & EUT Connections: 4mm banana plug$1,490.00 - $18,950.00In stock -
EM Test TSS 500N4B Telecom Surge Generator
SKU: 9122
Applications: Telecom Testing, Conducted ImmunityTest Standards: Bellcore/Telcordia GR-1089-CoreWaveform: 10/250usOutput Voltage: 100 Volts to 4,000 VoltsOutput Current: 50 Amps to 2,000 Amps$1,950.00 - $37,500.00In Stock -
PA50G 10 MHz - 50 GHz, RF Preamplifier, 30 dB Gain
SKU: 8248
Application/Test Type: Overcome attenuation problems at higher frequencies.Connector: 2.4mm(f) to 2.4mm(f)Frequency Range: 10 MHz - 50 GHzGain: 25 dB typical$795.00 - $9,975.00In Stock -
EM Test VCS 500N10T Combination Wave Telecom Surge Generator
SKU: 10796
EMC Standards: IEC 61000-4-5, IEC 61000-4-9Pulse current (short circuit): max. 5,000A ± 10%Pulse voltage (open circuit): 500V - 10,000V ± 10%Test duration: 1 - 30,000 or endlessCoupling Network: EMTest CN 508S1$1,975.00 - $3,450.00In stock -
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6
SKU: 11251
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 40VrmsBCI Test Levels (w/ built-in amplifier): 8VrmsTypically In Stock -
EMC Partner MIG1206 12kV Surge Generator
SKU: 6527
Telecom Standards: IEC/EN 61000-4-5 , ITU K-series and IEC 60950EMC Standards: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Max EUT Voltage: 480 VoltsMax EUT Current: 32 AmpsCombination/Wave Surge Output Voltage: 12.5 kVIN STOCK -
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst
SKU: sku-221
Weight: 11 kg (24 lbs)Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.Current Rating: 100 Amp or 200 Amp continous depending on modelCompatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Mains & EUT Connections: SHV; Screw terminals, rated for 200 A$395.00 - $495.00In Stock -
AE Techron 4301 DC Voltage Variations and Telecom Transients Test System
SKU: 44557
Test Standards: GR-1089 Section 10 and ATIS-0600315.2007Maximum Continuous DC Current (±50 VDC): 60-240 Amps (model dependent)Maximum Pulse DC Current (up to ±100 VDC): 200-800 Amps (model dependent)Voltage Gain: 20Maximum Input Voltage: ±10V, unbalancedInquire for Availability -
Typically In Stock -
Teseq NSG 3060-ITU Transient Generator for Surge, Telecom, EFT/Burst, IEC and ITU-T.K
SKU: 10406
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 264 VoltsMax EUT AC Current (w/ Built in CDN): 16 AmpsInquire for Availability -
3ctest CDN 405AF8 Surge Coupling/Decoupling Network for Data Lines
SKU: 30092
Application/Test Type: Test low-speed communication lines against lightening surge as per figure 12 in IEC/EN61000-4-5 edition 3Coupling: 4 pair unshielded assymetric linesCurrent Rating: Max 1 AImpedance: 200Ω ±5%Inductors: 20 mH DecouplingInquire for Lead Time -
Haefely DEC 6 Decoupling Network for Symmetrical Data and Control Lines
SKU: 0481
Weight: approx. 2 kg netCoupling: Decoupling elements Resistors 200 OhmDimensions: 30 x 20 x 16 cm (w x h x d)DUT current: Current on EUT lines max. 0.1APulse amplitude: max. 6.6kV$250.00 - $1,500.00In Stock