Standards Categories
Standards Test Equipment
-
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps
SKU: 11287
Application/Test Type: Power line conducted emissions testsCurrent Rating: 10 AmpsDimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cmFrequency Range: 9 kHz to 30 MHzInductors: 50 µH/250µH$195.00 - $1,975.00In Stock -
Teseq CDN HSS-2 Surge CDN for High Speed Communication Lines
SKU: 6195
Application/Test Type: ISDN, 10/100BaseT, 1000BaseT etc., switchable per jumper, PoE applicable; 2 kV* (1.2/50 μs pulse as per IEC/EN 61000-4-5); Max. surge test current: 50 A (8/20 μs pulse as per IEC/EN 61000-4-5)Current Rating: 1 A (rated for Power over Ethernet)Insertion Loss: 9 dB at 100 MHzMains & EUT Connections: RJ45 female; HV connector female (Fischer D103A023)Standards Met: IEC 61000-4-5 Ed. 3RENTAL ONLY -
3ctest CDN 405M40-5 Surge Coupler for Unshielded Unsymmetric Lines
SKU: 30188
Test Standards: EN/IEC 61000-4-5Applications: Data lines Unshielded, Unsymmetrical Surge ImmunityData Rate: 100 Kbit/sSurge Voltage Handling: 6kVInquire for Availability -
Schwarzbeck NNBL 8226 MIL-STD-461 LISN
SKU: 6862
Frequency Range: 9 kHz - 100 MHzMax. cont. current: 70 AMax. current (limited time): 100 AMax Voltage (DC): 500 VMax. Voltage (AC 50/60 Hz): 250 V$2,775.00Typically in Stock -
IEC/EN 61000-4-X Test Rack for Conducted Immunity Certification
SKU: 11195
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, IEC/EN 61000-4-12Applications: Electrical Transient and Noise, Surge Immunity, Power FailuresTest Setup: Conducted Immunity/Susceptibility Test SetupMax EUT Power: 600 Voltas @ 100 AmpsInquire for Availability -
3ctest EDS 30V Automotive ESD Simulator for ISO 10605
SKU: 6206
Test Standards: ISO 10605 Edition 3, IEC 61000-4-2Additional Test Standards: MIL-STD-461 CS118, RTCA DO-160, IEC 60601-1-2ESD Voltage Output Range (Air/Contact): 30 kVInterchangeable R/C Modules: YesBattery Life: 8 Hours$495.00 - $985.00IN STOCK -
EMC Partner ESD3000 ESD Generator
SKU: 10723
Weight: 1.7 kgBattery: at least 8 hour battery lifeVoltage Range: .08 up to 30kV depending on module typePre-Programmed IEC Levels: YesResolution: 100V steps$795.00 - $2,195.00Typically In Stock -
Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1
SKU: 22721
Frequency Range: 9 kHz to 7 GHzSSB Phase Noise: –90 dBc (1 Hz) (typ.)Frequency Response: 100 kHz ≤ f ≤ 7 GHz, < 3 dBDynamic Range: 110 dBRF Output Connector: N Type Female, 50 ΩCALL FOR LEAD TIME -
Rent Fischer F-52 Current Monitor Probe 10kHz – 500MHz
SKU: 30067
Top Frequency Range: 500 MHzBottom Frequency Range: 10 kHzAC Current Handling (DC-400Hz): 350 AmpsRF Current Handling (CW/Pulse): 50/100 AmpsApplications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingShips within 24 hours. -
Haefely PSURGE 8000 EMC Surge Platform with Expandable PIM Modules
SKU: 11411
Surge/Combination Wave: IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Ring Wave: EN/IEC 61000-4-12, IEC/EN 61000-4-5 Ed. 1 & 2, ANSI C62.45Damped Oscillatory Wave: EC 61000-4-18, ANSI C37.90, IEC 60255-22-1, IEEE 1613Telecom Surge: IEC/EN 61000-4-5 , ITU K-series and IEC 60950In Stock -
FCC F-150-1 7 GHz Bulk Current Injection Probe
SKU: 25366
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 Watts (30 minutes)Test Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: .47" ( 12mm )Frequency Range: 2.3 GHz – 7.0 GHzInquire for Availability -
FCC F-150 2.1 GHz Bulk Current Injection Probe
SKU: 25365
Applications: EMC BCI Tests, Military EMC TestingMaximum input power: 250 WattsTest Standards: ISO 11452-4, DO-160 , MIL-STD-461Hole Diameter: 1.25" ( 32mm )Frequency Range: 800 MHz - 2.1 GHzInquire for Availability