Standards

(Showing 12 of 727)
Show 12 24 36 48 96

Standards Categories

CE Mark Testing
CE Mark Testing
FCC Part 15
FCC Part 15
International (IEC/EN)
International (IEC/EN)
ANSI/IEEE Standards
ANSI/IEEE Standards
CISPR Standards
CISPR Standards
MIL-STD-461
MIL-STD-461
RTCA DO-160
RTCA DO-160
ISO 7637
ISO 7637
ISO 11452
ISO 11452
Automotive EMC Standards
Automotive EMC Standards
Telecom Testing
Telecom Testing
Standards by Product/Industry
Standards by Product/Industry

Standards Test Equipment, Systems & Solutions

  • 3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

    3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

    SKU: sku-333

    Polarity: Positive, Negative or Alternate
    Weight: Approx 15 kg (33 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Counter: 1-999
    Coupling: Optional for external SPN series CDN's
    Dimensions: 19 inch/6u
    Frequency Range: 50/60Hz±5%
    Front Time: Voltage: 10us±20%, time to half value: 700us±20%;
    Impedance: 2 phm, Optional 12 ohm and 500 ohm
    Mains & EUT Connections: 4mm banana plug
    Output Current: Front time: 5us±20%, time to half value: 320us±20%
    Polarity-2: Positive, Negative and Alternating
    Pulse current (short circuit): 0.15 kA–3.0kA ±10% （2ohm）
    Pulse Duration: 11s-99s （shortest depends on test voltage）
    Pulse repetition: 1-999
    Pulse voltage (open circuit): 0.3kV–6.0kV ±10%
    RF Connector: BNC, 5VTTL
    Standards Met: UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5, GB/T 17626.5
    Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations
    Test duration: 6s-99s
    Test Voltage: 0.2kV–6.0kV,±10%
    Transfer Impedance: 15ohm, 40ohm （automatic switch)
    Voltage Rating: AC 110V/220V , ±10%,
    VIEW PRODUCT Cart
  • Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

    Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

    SKU: 10795

    Weight: Approx. 40 kg (88 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Coupling: IEC/external
    Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)
    Display Interface: 7“ touch-screen
    Impedance: 2/12 Ω
    Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)
    Polarity: pos / neg / alternate
    Pulse current (short circuit): ±250 A to 7.5 kA
    Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.
    Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)
    Supply Voltage: 85 to 265 VAC, 50/60 Hz
    Test duration: 1 to 9999 pulses, continuous
    Equipment Group: Combination Wave Generators
    VIEW PRODUCT Cart
  • Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

    Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

    SKU: sku-219

    Application/Test Type: Automated Surge Immunity Testing
    Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)
    Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)
    Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41
    Voltage Rating: 480 VAC rms Line to Line
    Inquire for Availability
    VIEW PRODUCT Cart
  • Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

    Com-Power CLCI-100 Bulk Current Injection Probe for 10 KHz to 100 MHz

    SKU: sku-384

    Weight: 4.5 lbs. (2.04 Kg)
    Aperture: 1.575” (40 mm)
    Application/Test Type: Conducted and Radiated Susceptibility Testing
    Dimensions: Window Diameter: 1.575” (40 mm) Outside Diameter: 5.75” (146 mm) Width: 2.75” (70 mm)
    Frequency Range: 10 KHz to 100 MHz
    RF Connector: N-Type (female)
    Standards Met: EC 61000-4-6 and CISPR 16-1-2
    VIEW PRODUCT Cart
  • Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing - The EMC Shop

    Noiseken ESS-B3011 & GT-30R Electrostatic Discharge Simulator System for up to 30kV Testing

    SKU: 345

    Weight: Generator : Approx. 4.8kg Discharge gun : Approx. 800g ( excluding cable and connector)
    Standards Met: IEC 61000-4-2, ISO 10605
    Air Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）
    Battery: AC100V to AC240V ±10% 50Hz／60Hz 62VA
    Contact Discharge Voltage Range: 0.20kV30.0kV±5%（30.5kVmax）
    Polarity: positive/negative
    Pre-Programmed IEC Levels: Yes
    Resolution: Air discharge mode : 2.0kV, 4.0kV, 8.0kV and 15.0kV step Contact discharge mode : 2.0kV, 4.0kV, 6.0kV and 8.0kV step
    Typically In Stock
    VIEW PRODUCT Cart
  • PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC - The EMC Shop

    PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

    SKU: 8784

    Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
    Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
    RF Connector: BNC (f)
    Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15
    Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
    Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4
    Typically In Stock
    VIEW PRODUCT Cart
  • Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

    Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

    SKU: 22006

    Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household
    Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
    Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)
    Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods
    Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)
    Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)
    Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV
    Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2
    Inquire for Availability
    VIEW PRODUCT Cart