Surge, Burst/EFT, Ring Wave, Dips & Interrupts

Quick Links

Information

Viewed products

Rent Teseq NSG 3040-IEC Immunity Generator for Surge, Burst/EFT, and Power Quality

Rental

More details

Typically In Stock

$1,500.00 + Shipping

  • Monthly
  • 3 Months
  • Bi-Weekly

Request Quote/More Info

Specifications

Pulse voltage (open circuit) ±200 V to 4.4 kV (in 1 V steps)
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
Parameter Value
Impedance 2/12 Ω
Pulse current (short circuit) ±100 A to 2.2 kA
Coupling external / internal (16 amps)
Repetition time 1 ms to 4200 s (70 min)
Pulse repetition 10 s, up to 600 s (in 1 s steps)
Phase synchronization asynchronous, synchronous 0 to 359º (in 1º steps)
Polarity positive / negative / alternate
Phase synchronization asynchronous, synchronous 0 to 359º (in 1º steps)
Coupling external / internal (16 amps)
Dips, Interrupts & Variations
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Parameter Value
Dips, Interrupts & Variations From EUT voltage input to 0 V, 0%
Test duration continuous
Uvar with step transformer 0, 40, 70, 80% (INA 650x)
Test duration 1 s to 1000 h
Peak inrush current capability 500 A (at 230 V)
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
Parameter Value
Pulse amplitude ±200 V to 4.8 kV (in 1 V steps) - open circuit; ±100 V to 2.4 kV (50 Ω matching system)
Burst frequency 100 Hz to 1000 kHz
Polarity positive / negative / alternate
Uvar with optional variac depending on model (VAR 650x)
Switching times 1 to 5 μs (100 Ω load)
Event time 20 μs to 1999 s, 1 to 99’999 cycles
Test duration 1 s to 70’000 min, 1 to 99’999 events, continuous
Repetition time 40 μs to 35 min, 1 to 99’999 cycles
Phase synchronization asynchronous, synchronous 0 to 359º (in 1º steps)
Burst time 1 μs to 1999 s, single pulse, continuous
Dimensions 449 (17.7”) x 226 (8.9”; 5 HU) x 565 mm (22.2”) (W x H x D)

Test Equipment Description

Evaluate your product for several CE Mark and other certification standards with the multifunction Teseq NSG 3040-IEC Transient Generator with capabilities of Surge Simulatoion per IEC 61000-4-5, Burst/Fast Transient Simulation per IEC 61000-4-4, Dips, interruptions and variations per IEC 61000-4-11 and DC Voltage Variations per IEC 61000-4-29.

The built in CDN will allow for testing on products Single Phase up to 16 Amps. Larger CDN's and accessories are available below, contact The EMC Shop to check for availability and configure your rental transient system.

Teseq’s NSG 3040-IEC immunity generator for CE mark testing, includes Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV), and Power Quality Testing (PQT). Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests.

Teseq NSG 3040-IEC Video Overview

Rental Teseq NSG 3040 Includes:

  • NSG 3040 Generator
  • User Manual
  • 1 Mains Power Cable
  • 1 Dummy Plug (interlock connector)
  • 1 Grounding Strip 10cm
  • 1 EUT Power Input Connector with Cable
  • 1 EUT Power Output Connector

Teseq NSG 3040-IEC Features:

Associated EMC Test Equipment

20 other products in the same category: