Test Type

(Showing 12 of 519)
 
 

The EMC Shop stocks equipment for unique test and measurement applications.

UN ECE Regulation 10 Test Equipment & Chambers at The EMC Shop

RENTALS ARE FAST & EASY

  1. Select products and add to cart
  2. Add quantities of lisn's in checkout
  3. Specify shipping speed & account number
  4. Provide notes and directions at Checkout
  5. Evaluate Equipment upon receipt
  6. Return with no RMA to our Rocklin office
 
Show 12 24 36 48 96

Test Type Categories

Military EMC
Military EMC
IC's and PCB EMC
IC's and PCB EMC
Radiated Emissions
Radiated Emissions
Conducted Emissions
Conducted Emissions
Radiated Immunity
Radiated Immunity
Conducted Immunity
Conducted Immunity
ESD HBM/MM/CDM
ESD HBM/MM/CDM
EMI Debugging
EMI Debugging
RF Interference Analyzers & Scanners
RF Interference Analyzers & Scanners
Lightning Induced Transient Susceptibility Testing
Lightning Induced Transient Susceptibility Testing
Tempest Testing
Tempest Testing
Safety/Compliance
Safety/Compliance
Battery Testing Equipment
Battery Testing Equipment
Spectrum Analyzers for EMC Testing
Spectrum Analyzers for EMC Testing

Test Type Test Equipment, Systems & Solutions

  • Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

    SKU: 10161

    Weight: 550 grams (1800 grams with storage case)
    Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines
    Common Mode Impedance: 150 Ω ±20 Ω
    Current Rating: 600 mA (line), 1200 mA (pair)
    Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB
    Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)
    Frequency Range: 150 kHz to 30 MHz
    Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.
    RF Connector: BNC 50 Ω
    RF Input Voltage: 15 V max
    Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4
    Voltage Division Factor: 10 dB ±1 dB
    Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds
    T
    VIEW PRODUCT Cart
  • PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15 - The EMC Shop

    PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

    SKU: 10057

    Weight: 50 kg (110 pounds)
    Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
    Current Rating: 63 Amps Max
    Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 63 A IEC connector
    RF Connector: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)
    CISPR 16-1-2: Yes
    DO-160F: Yes
    CISPR 22: Yes
    FCC: Yes
    ANSI C63.4: Yes
    VIEW PRODUCT Cart
  • 3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

    3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5

    SKU: sku-798

    Weight: Approx 44 kg (97 lbs)
    Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5
    Dimensions: 19 inch/6u
    Impedance: 2 Ohm
    Phase synchronization: 0°-360°, 1°step or random
    Polarity: Positive, Negative, Alternate
    Pulse current (short circuit): 0.1kA-5kA ±10%
    Pulse voltage (open circuit): 0.2kV - 10kV ±10%
    Standards Met: IEC 61000-4-5
    VIEW PRODUCT Cart
  • Schwarzbeck STLP 9128 C Stacked Log Periodic Antenna

    Schwarzbeck STLP 9128 C Stacked Log Periodic Antenna

    SKU: sku-1831

    Frequency Range: 200 MHz - 1.5 GHz
    Isotropic Gain: 9 - 10 +/- 1dBi
    Antenna Factor: 8 - 24 dB/m
    Cross Polarization: >30 dB (200 MHz...1 GHz)
    $7,495.00
    Inquire for Availability
  • RF/EMC Anechoic Test Chamber Build and Installs

    RF/EMC Anechoic Test Chamber Build and Install

    SKU: sku-1326

    Test Standards: CISPR 25, MIL-STD-461, IEC 61000-4-3, CISPR 16 and more
    Chamber Sizes: 1 meter and 3 meters (10 meters coming soon)
    Frequency Range: 30 MHz - 100 GHz
    Chamber Types: Anechoic, Semi-Anechoic, Reverberation, Tent/Portable
    Faster Than Most!
    VIEW PRODUCT Cart