RF Test Equipment

RF test equipment are required for radiated immunity testing portions for CE Marking and other product certification. The EMC Shop stocks RFI equipment a-la-carte or can configure a turnkey RF immunity test system. Most systems can be easily upgraded to include additional tests as required.

Get Application Support, Pricing, Lead Time and More: C...

RF test equipment are required for radiated immunity testing portions for CE Marking and other product certification. The EMC Shop stocks RFI equipment a-la-carte or can configure a turnkey RF immunity test system. Most systems can be easily upgraded to include additional tests as required.

Get Application Support, Pricing, Lead Time and More: Contact Form



Common RF Test Equipment

  • Power Amplifiers: Key component for generating power levels and field strengths in commercial, military and aerospace standards
  • Signal Generators: Generate the sweep frequencies, pulses and modulations for RF immunity tests
  • LISN's: Utilized to isolate EUT susceptibilities from external variables.
  • CISPR Compliant Receivers: EMC analyzers conorming to CISPR 16-1-2 and MIL-STD emissions testing and analysis.
  • RF Switches: Used to automate broadband systems requiring multiple RF amplifiers and other system components.
  • Chambers: RF immunity testing must be done in a shielded enclosure to keep nearby personnel and electronics safe.
  • Field Probes: Verify RF field strengths.

More

RF Test Equipment There are 45 products.

Subcategories

  • RF Preamplifiers

    The EMC Shop stocks a variety of RF Preamplifiers for many types of compliance testing requirements. We stock a variety of high gain preamplifiers designed for electromagnetic interference (EMI) certification and testing.

    Call or Request Price Quote

    Broadband RF preamplifiers are used during EMC measurements to reduce the effects of interference and noise. Preamplifiers are used to amplify weak electrical signals captured by antennas. During electromagnetic interference testing the preamplifier is usually located as close as possible to the antenna to reduce feed line losses. This active antenna positioning is often used in microwave systems, because coaxial cables suffer of high loss at microwave frequencies.

    The EMC Shop carries preamplifiers from top Brands like:

    A.H. Systems

    Com-Power

    Teseq (Schaffner)

    and more!!

  • RF Power Monitoring

    The EMC Shop stocks Power Meters & Power Sensors of various types (CW, average and peak and average), covering numerous frequency and power ranges to accurately measure the power of RF and microwave signals.

    Applications include aerospace and defence, wireless, calibration labs, and various average power measurements.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • EMC/EMI Signal Generators

    RF signal generators are often described as function generators or waveform generators. Typically, a radio frequency signal generator is designed to produce electric signals with very high spectral purity and stable frequency and amplitude.

    Radio Frequency (RF) signal generators produce CW (continues waves) tones. The output frequency can be tuned anywhere in its frequency range. Our models offer various types of analog modulation and include AM, FM, Phase and Pulse modulation.

    Get Application Support, Pricing, Lead Time and More: Contact Form

  • RF Switches

    Order RF Switches for Automatic Test Systems. The EMC Shop is the only online store for electromagnetic compliance test equipment and accessories.

  • Transient Limiters

    Protect your expensive spectrum/EMI analyzer with a transient limiter. When injecting electrical disturbances on your equipment for EMC testing purposes, you risk feedback of several thousand volts into your spectrum/EMI analyzer.

  • Stripline

    Strip Lines are made for the generation of homogeneous electromagnetic fields and specified in ISO 11452-5 and EU guidelines 95/94. The strip lines can be used for testing of electrical/electronic submodules (EUB) and their associated cables.

per page
Showing 1 - 12 of 45 items
    • Test procedure acc. IEC 61000-4-6 Ed. 4
    • Built-in amplifier saturation and linearity check
    • Built-in power amplifier 25 to 80 watts, 10 kHz to 400 MHz
    • Built-in power meter, 9 kHz to 1 GHz
    • Built-in dual directional coupler
    • Automatic calibration via built-in power meter
    • Connection for external amplifiers up to 1 GHz
    • USB-Interface
    • Software for Windows 7, Windows 8
    Typically In Stock
    Request Quote/More Info
    • Output: 500 Watts CW
    • Frequency Range: 10 kHz - 100 MHz
    • Connectors:
      • RF In: f(N)-type
      • RF Out: f(N)-type
    4-6 Weeks
    Request Quote/More Info
    • EMI test receiver and signal/spectrum analyzer combined in one box
    • Resolution bandwidths in line with CISPR
    • Weighting detectors: max. peak, min. peak, average, RMS, quasi-peak, average with meter time constant, and RMS in line with current CISPR 16-1-1 version
    • Very fast FFT-based time domain scan as an option
    • Automatic test routines
    Typically In Stock
    Request Quote/More Info
    • Solid-state linear design 
    • Suitable for CW, AM, FM and pulse
    • 50 ohm input/output impedance 
    • Built-in Control, Monitoring and Protection functions 
    • High reliability and ruggedness
    • 50 ohm input/output impedance
    • Output: 500 Watts Continuous
    • Frequency Range: 80 MHz - 1000 MHz
    • Connectors:
      • RF In: N(f)-type
      • RF Out: N(f)-type
    4-6 Weeks
    Request Quote/More Info
  • Typically In Stock
    Request Quote/More Info
    • 30 MHz to 2000 MHz
    • 200 W power handling
    • Robust and lightweight
    • Optimized for precompliance testing of immunity and emission
    4-6 Weeks
    Request Quote/More Info
    • Setup and install available from The EMC Shop
    • Long Term Rentals & Leases Available
    • Electric fields= 100 db from 14 KHz to 10 MHz
    • Plane waves= 100 db from 100 MHz to 10 GHz
    • 208V 3ph AC Power filters and fire sprinkler adapter
    • 12' by 20' by 8'
    • 6 month warranty
    4-6 Weeks
    Request Quote/More Info
    • Broadband Frequency Range of 1 MHz - 1000 MHz
    • Low Noise Figure: less than 6 dB
    • High Gain: 33 dB
    • Low VSWR: 1.3:1 Max
    • Output Power: +4 dBm @ 1 dB compression
    • Flatness: ± 3 dB
    • Reverse Isolation: Greater than 30 dB
    • Impedance: 50 Ohms
    • Connector: N-type (f)
    Typically In Stock
    Request Quote/More Info
    • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
    • 433 Volts AC (Optional 1,000 Volts)
    • Designed for IEC/EN 61000-4-6
    • Conforms with CISPR 16-1-2
    • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
    • Excellent performance
    • Calibration kit available
    • 4 mm banana sockets
    • CDN for M2 application
    Typical Lead Time 4 - 6 Weeks
    Request Quote/More Info
    • three module slots on the back and two on the front
    • Compact size requiring little space
    • Optimal configuration by selecting the appropriate switch and control modules
    • Plug & play makes complex installation superfluou
    $8,999.00
    In Stock
    Request Quote/More Info
    • High insulation resistance over a wide temperature range
    • Excellent stability with long life
    • Built-in discharge resistor for safety
    • Designed for bulkhead or bench mounting
    4-6 Weeks
    Request Quote/More Info
    • 3 power lines, (L+N+PE), (2L+PE), Optional L+L+L
    • Frequency range 150 kHz - 230 MHz (Optional 10 kHz - 80 MHz)
    • 433 Volts AC
    • Designed for IEC/EN 61000-4-6
    • Conforms with CISPR 16-1-2
    • Enables testing to CISPR 16-2-1 and CISPR 15 CDN method
    • Excellent performance
    • Calibration kit available
    • 4 mm banana sockets
    • CDN for M3 application
    Typical Lead time: 4 - 6 Weeks
    Request Quote/More Info
Showing 1 - 12 of 45 items