Normative References Categories
Normative References Test Equipment
-
Radiated Emissions Testing Equipment for FCC, MIL and More
SKU: sku-1164
Generic Standards: IEC 61000-6-3, IEC 61000-6-4 -
3ctest SG3483 Multiple Waveform Lightning Surge Simulator for IEC 61000-4-5
SKU: sku-605
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Counter: unlimitedOutput: Output waveform 1, 2, 3: 2kV - 20kVPolarity: pos / neg / alternatePulse current (short circuit): 2kV ±10%@50A ±10% 6kV ±10%@150A ±10% 10kV ±10%@250A ±10% 15kV ±10%@375A ±10% 20kV ±10%@500A ±10% -
Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz
SKU: sku-603
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: up to 100 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 9 kHz to 30 MHz -
Teseq ProfLine 2145-208 Harmonics & Flicker Measuring System
SKU: 11156
Phase synchronization: 3Voltage Rating: 45 kvDual Range VAC: 150 V and 300 VDual Range VDC: 200 V and 400 VWeight: 522 kgInquire for Availability -
Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: sku-598
Weight: 30 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesFrequency Range: 150 kHz to 30 MHzInductors: 50 µH$6,495.00 -
Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: sku-159
Frequency Range: 150 kHz to 80 MHzRF Input Voltage: 15 V -
Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs
SKU: 10161
Weight: 550 grams (1800 grams with storage case)Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication linesCommon Mode Impedance: 150 Ω ±20 ΩCurrent Rating: 600 mA (line), 1200 mA (pair)Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dBT -
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15
SKU: 10057
Weight: 50 kg (110 pounds)Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.Current Rating: 63 Amps MaxDimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)Frequency Range: 9 kHz to 30 MHz -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random -
Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing
SKU: 30082
Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)Frequency Resolution: 0.01 HzFrequency Counter Resolution: 0.1 Hz to 10 kHzTest Standards: CISPR 16-1-1, MIL-STD-461Applications: Conducted Emissions, Radiated EmissionsInquire for Lead Time -
Schwarzbeck ISN S8 Impedance Stabilization Network
SKU: 8857
Connector to EUT: RJ45 connector | CAT 6 CableMax Voltage Handling: 150 VDC | 100 VACMax Current Handling: 1 AmpApplication: Shielded Data Lines Conducted Emissions Measurements$1,800.00In Stock -
Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines
SKU: sku-172
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V