Normative References Categories
Normative References Test Equipment
-
-
Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz
SKU: sku-278
Weight: 150 g (5.3 oz)Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Battery: N/ACommunication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialDigital Filtering: N/A -
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Inquire -
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Teseq ITS 6006 Radiated Immunity Test System
SKU: 11290
Frequency Range: 80 MHz to 6 GHzInput: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTLOutput: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 ΩReference frequency: 10 MHzApplications: RF/Radiated Immunity & Susceptibility Testing$1,975.00 - $18,000.00In Stock -
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5
SKU: 30150
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB$410.00 - $4,100.00Typically in Stock -
EM Test Automotive Transient Emission Set for ISO 7637-2
SKU: 30011
Applications: EV and AutomotiveTest Standards: ISO 7637-2Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)Inquire for Availability -
PMM (Narda) AS-02 Antenna Set, 30 MHz - 3 GHz, 75 Watts
SKU: 6598
Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz)Antennas: Kits & SetsApplication/Test Type: Radiated EMCConnector: N-Type(female)Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02)Inquire for Lead Time -
Rent Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network
SKU: 11124
Weight: 27.5 lbs.Application/Test Type: Power Line Conducted Emissions TestsCurrent Rating: 32 AmperesDimensions: 19.3” x 13.9” x 2.3"Frequency Range: 150 kHz to 30 MHzInquire for Availability -
3ctest EFT 700 Burst/EFT Simulator up to 7 kV with Single or Three Phase CDN
SKU: sku-566
Test Capabilities: EFT Immunity, Medical DevicesStandards Met: IEC/EN 61000-4-4Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 250 Volts (380V w/ 3PH CDN)Max EUT AC Current (w/ Built in CDN): 16 Amps -
EM Test CCI Capacitive EFT Coupling Clamp as per IEC 61000-4-4
SKU: 10570
Application/Test Type: Electrical Fast Transient Immunity on Data Lines (EFT Burst)Standards Met: IEC/EN 61000-4-4Voltage Rating: up to 7.0 kVCompatible Generators: EFT GeneratorsElectrical Noise/Transient ImmunityTypically In Stock -
LISN-CISPR16 25 Amp Line Impedance Stabilization Network 50μH/250μH
SKU: 12014
Weight: 28 lbsApplications: EMC Conducted Emissions, Precompliance TestingFrequency Range: 9 kHz - 30 MHzOutput Current: 25 AmpTest Standards: CISPR 16 LISNIn Stock