Normative References Categories
Normative References Test Equipment
-
California Instruments 5001iX Flicker & Harmonics Generator
SKU: 6723
Current rating: 120 ampsVoltage ranges: 150-300 VoltsTest Standards: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15Applications: Flicker and Harmonics TestingTypically In Stock -
Teseq HLA 6121 60 cm Loop Antenna 9 kHz to 30 MHz
SKU: 10128
Weight: approx. 2 kgDimensions: L x W: 620 mm x 700 mmFrequency Range: 9 kHz to 30 MHzImpedance: 50 ΩApplications: Radiated Emissions, Military & Aviation EMC TestingInquire for Availability -
FCC-LISN-50-50-4-02 Line Impedance Stabilization Network
SKU: 12364-1
EUT Current Handling: 32 AmpsEUT Voltage Handling: 540V/260VApplications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITServices Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/CharacterizationTest Standards: ISO 60601-1-2, FCC Part 15Inquire for Availability -
Yokogawa WT1800 High Performance Power Analyzer
SKU: 12351
Input Elements: 5Max Current (per Channel): 5 AmpsMax Voltage (per Channel): 1,000 VoltsOptions: B5, G5, DTHarmonic Measurement Standards: EN/IEC 61000-3-2, EN/IEC 61000-3-12$695.00 - $2,795.00IN STOCK -
PMACISPR25 Passive Monopole Antenna DC - 300 MHz
SKU: 30097
Applications: Shielding Effectiveness MeasurementsPower Handling: 2,000 WattsFrequency Range: DC - 300 MHzEMC Standards: CISPR 25, CISPR 16-1-6Pattern Type: OmnidirectionalTypically In Stock -
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network
SKU: sku-1917
Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and moreApplication/Test Type: Medical Device EMC TestingBuilt-in Power Analyzer: EM Test DPA 503NCurrent Handling: 32 Amps per phaseRENTAL ONLY -
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133
SKU: 11050
Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Applications: EMC Surge, CE Marking, Surge ImmunityMax EUT AC Voltage (W/ Built In CDN): 690 VoltsMax EUT AC Current (W/ Built In CDN): 32 AmpsMax EUT DC Voltage (W/ Built In CDN): 270 Volts$5,975.001 System Left -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsTypically In Stock -
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4
SKU: 10621
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Cable Diameter: up to 40 mm (1.57 in)Coupling Length: 1 m (39.4 in)Dimensions: 1040x140x110mmEFT Coupling Clamps: as per IEC 61000-4-44 to 6 Weeks -
Thermo Keytek ECAT Transient Generator System
SKU: 11321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864In Stock -
Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5
SKU: sku-783
Condition (5-10 Scale): 9Warranty: 6 MonthsCalibration: Fresh w/ Data at Time of OrderTest standard: IEC 61000-4-5Accessorries: Complete$7,950.001 LEFT