Surge, Burst/EFT, Ring Wave, Dips & Interrupts

Information

Quick Links

Viewed products

EM Test NX5 Compact EMC Generator for EFT/Burst, Surge & Power Fail up to 5.5 kV

New

  • Rent EM Test NX5 here.
  • Model: bsp-1-300-16 for Burst, Surge, Power Fail
  • Built-in single phase CDN 300 V, 16 A
  • Smallest compact generator with 7" touch screen
  • Surge Immunity per IEC 61000-4-5
  • EFT/Burst Immunity per IEC 61000-4-4
  • Powerfail Immunity per IEC 61000-4-11
  • Monitoring Outputs (BNC)

More details

In Stock

Request Quote/More Info

Specifications

Pulse voltage (open circuit) 160 V - 5,000 V ± 10%
Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse)
Pulse conforms to IEC/EN 61000-4-5
Parameter Value
Pulse current (short circuit) Max 2,500 A ± 10%
Coupling external / internal
Repetition time 10 ms - 9,999 ms
Pulse repetition max. 1 Hz (1 s - 9999 s)
Polarity positive / negative / alternate
Phase synchronization 0° - 360°, resolution 1° (16 - 500 Hz)
Coupling external / internal
Phase synchronization 0° - 360°, resolution 1º
Dips, Interrupts & Variations
Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29
Parameter Value
Test duration 1 - 99,999 or endless, selectable
Test duration 0:01 min - 99:59 min or endless
Peak inrush current capability greater than 500 Amps
Burst (EFT) 5/50 ns
Pulse conforms to IEC/EN 61000-4-4
Parameter Value
Pulse amplitude 200 V to 5.5 kV 100 V to 2.75 kV (50 Ω matching system)
Burst frequency 0.10 ms - 9999 ms
Polarity positive / negative / alternate
Switching times greater than 1 us less than 5 us into a 100 ohm resistive load (SVP 100)
Event time 20 us - 9,999 s
Test duration 20 us - 9,999 s
Repetition time 10 ms - 9,999 s
Phase synchronization 0° - 360°, resolution 1° (16 - 500 Hz)
Burst time 0.1 kHz - 1,000 kHz

Test Equipment Description

Included with EM Test NX5:

  • Compact NX5 Mainframe
  • Power Mains Cable (USA)
  • EUT Supply Cable (USA)
  • EUT Supply Adapter (USA)
  • Safety Circuit Adapter
  • Warning Lamp Adapter
  • Ethernet Cable
  • IEC.ctrl Software
  • Manual (USB)
  • Quick Start Guide

About the EM Test NX5:

The EM Test NX5 is a versatile tester to address transient and power fail requirements for both international and commercial standards. Featuring an easy-to-use color touch screen, the NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing and CE Marking.

The EMC Shop supplies a large range of accessories for various applications such as magnetic field tests and more.

The standard configuration available when you rent from The EMC Shop includes capabilities of EFT/Burst (IEC 61000-4-4) up to 5.5 kV, Surge (IEC 61000-4-5) up to 5.0 kV and Powerfail (IEC 61000-4-11), with a built in single phase coupler rated to 300 Volts (p-n) AC + DC and 16 Amps.

EM Test NX5 Operation:

The EM Test NX5 can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface.

EM Test NX5 Software:

The EM Test NX5 has clearly structured windows and operation features, comprehensive standards library along with the flexibility to easily generate user specific test sequences are the main features of iec.control software.

Extensive reporting capabilities help the user to create test reports that meet international requirements. The iec.control is supported by Windows 7, Windows 8 and Windows 10.

Remote control is achieved either via Ethernet or optical interface with USB connector at the PC side.

Standards Met:

Associated EMC Test Equipment

18 other products in the same category: